The operationQfany tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage° Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask over the spectacles or standard safety glasses.
DEPTH STAKE | ||
Cnow how to operate all controls before | The depth stake can be raised or lowered | |
to allow you more versatile tilling and culti- | ||
=dding fuel and oil or attempting to start | ||
vating, or to more easily transport your | ||
:ngine. | ||
tiller. | ||
;TOPPING | ||
|
tINES AND DRIVE
Release drive control bar to stop move- menL
Move shift lever to "N" (neutral) position.
_TOPPING ENGINE
Move throttle control to "STOP" position. If equipped with stop switch, move
switch | to "STOP" | position. |
Never | use choke to stop engine. | |
)rive Control Bar |
| |
ENGAGED" Position | Shift Lever | |
)rive
DISENGAGED"
'osition
Throttle
"INE OPERATION - WITH WHEEL )RIVE
Always release drive control bar before moving shift lever into another position. Tine movement is achieved by moving shift lever to ( _, ) till position and engaging drive control bar.
:ORWARD - WHEELS ONLY/TINES _TOPPED
Release drive control bar and move shift lever indicator to "F" (forward) position.
Engage drive control bar and tiller will move forward.
fEVERSE - WHEELS ONLY/TINES ;TOPPED
DO NOT STAND DIRECTLY BEHIND
TILLER.
Release the drive control bar.
Shallowest | Tilling ....._ |
(Cultivating) | _ TransportPosition |
Deepest Tilling
Depth Stake,_
TILLING
o Release depth stake pin. Pull the depth stake up for increased tilling depth. Place depth stake pin in hole of depth stake to lock in position.
°Place shift lever indicator in till position. o Hold the drive control bar against the
handle to start tilling movement. Tines and wheels will both turn.
o Move throttle control to "FAST" position for deep tilling. To cultivate, throttle con- trol can be set at any desired speed,
depending on how fast or slow you wish to cultivate.
IMPORTANT: Always release drive control bar before moving shift lever into another position.
Depth Stake Pin
"Locked"
Position
Nut "B"
Move throttle control to "SLOW" posi- tion.
Move shift lever indicator to "R"
(reverse) position.
Hold drive control bar against the handle to start tiller movemenL
Nut "A" Outer Side Shield
9