Maintenance Instructions, Lubrication | Worksaver FM 560, FM 572

MAINTENANCE INSTRUCTIONS

Before operating the mower, make sure that it is properly lubricated and thoroughly inspected. Only a minimum of time and effort is required to regularly lubricate and maintain it. Following a regular program will provide long life and trouble free operation.

WARNING!

Always disengage the tractor PTO before raising the mower for transport or making adjustments.

LUBRICATION

Do not let excess grease collect on or around parts, par- ticularly when operating in sandy areas. The illustration below and on the next pages, show the location of all the lubrication fittings.

Use an SAE multi-purpose, lithium type grease for all the locations shown on figure 7. Be sure to clean the grease fittings before applying any grease. Daily lubrica- tion of the driveline U-joints is necessary. Failure to main- tain proper lubrication will result in premature wear and damage to the U-joints, gearbox and/or driveline.

Figure 7

Lubrication fitting location

Item	Description	Frequency*
1	Gauge wheel pivots	Every 8 hours or daily
2	Blade spindle	Every 8 hours or daily
N/S	U-joints	Every 8 hours or daily

*Lubrication intervals shown are for mowers operating under normal conditions. Severe or unusual conditions may require more frequent lubrication.

GEARBOX LUBRICATION

The gearbox must be filled with SAE 90 EP oil before operating.

To fill gearbox to the correct operating level:

1.Place the mower on an even and leveled surface.

2.Remove filler and test level plug (see figure 8 for location of plugs).

3.Add oil through the filler plug until it starts running out of the test plug. (Pour oil slowly to make sure that the lower portion of the gearbox housing has been filled)

4.Screw the test and filler plugs back in their correspon- ding places.

It is recommended that the oil level plug be removed after every 8-10 hours of operation and oil added until it runs out of the test plug hole. The filler plug hole and test plug hole are both located on the back of side of the gearbox.

Figure 8

Note:

1.It is recommended that the test plug be removed after every 8-10 hours of operation, and oil added to the proper fill level if required.

2.Do not overfill the gearbox with oil. This will result in pressure build up inside the unit, which can cause the oil seals to leak.

3.If the gearbox suddenly starts making an unusual noise, stop at once, check for oil leaks and refill it as required.

GAUGE WHEEL ASSEMBLIES

The gauge wheels are equipped with bearings which require grease regularly. Grease fittings are provided in the gauge wheel pivot. It is recommended that these be lubricated after every 8 hours of operation. See figure 9.

Figure 9

FM 560, FM 572 specifications

The Worksaver FM 560 and FM 572 are advanced agricultural implements designed to enhance efficiency and productivity in various farming operations. These machines are pivotal in delivering superior soil management and cultivation results, catering to the evolving needs of modern agriculture.

The FM 560 is engineered with a working width of 5.6 meters, while the FM 572 boasts an impressive 5.72 meters. Both models feature robust construction, ensuring durability and reliability even in challenging conditions. Built from high-strength materials, these implements can withstand the rigors of intensive farming practices.

One of the standout features of the Worksaver FM series is its adjustable working depth capabilities. Operators can easily set the depth to suit specific soil conditions and crops, allowing for tailored cultivation. This flexibility not only maximizes soil health but also optimizes crop yield. The active tilting mechanism on these models ensures that the implement maintains its position and effectiveness, even on uneven terrain, providing consistent results across fields.

Technologically, the Worksaver FM 560 and FM 572 are equipped with advanced hydraulic systems, enabling smooth operation and quick adjustments in the field. The hydraulic folding system simplifies transport, allowing for easy movement between fields without the need for time-consuming detachment. Additionally, the series includes a variety of interchangeable tines and share options, enabling farmers to customize their setup according to crop and soil type.

Safety is a critical aspect of the design, with features such as a safety shield and automatic overload protection ensuring the well-being of operators and equipment. The FM series also emphasizes ease of maintenance, with accessible components and straightforward servicing procedures, minimizing downtime and enhancing productivity.

In summary, the Worksaver FM 560 and FM 572 are exemplary tools in precision farming, blending innovative technology with practical features to meet contemporary agricultural demands. With their robust build, adjustable settings, and user-friendly operation, these models are ideal choices for farmers seeking to improve soil cultivation and achieve greater yields. The Worksaver FM series represents a commitment to quality and performance, making them invaluable assets in any modern farming operation.