Checklists, Delivery Checklist | Worksaver FM 560, FM 572 specs

CHECKLISTS

DELIVERY CHECKLIST

Inspect the mower thoroughly after assembly to be cer- tain it is set up properly. The following checklist is a reminder of points to inspect. Check off each item as it is found satisfactory or after proper adjustment is made.

■Check operator's manual and familiarize the opera- tor with all sections of it.

■Check that all safety shielding is in place.

■Check all bolts to be sure they are tight or adjusted properly at hinged locations.

■Check that all cotter pins are properly installed.

■Check PTO driveline. Make sure it is the correct length to operate mower with intended tractor.

■Check that all lubrication points with grease fittings have been lubricated.

■Check that blades have been properly installed. Check all blade bolts.

■Check mower attitude, after mounting on tractor.

■Check that gearbox is properly serviced and seals are not leaking.

■Check shear bolt for proper grade and installation.

■All safety signs (decals) in place and readable.

■When the cutter is transported on a road or highway at night or during the day, safety devices should be used for adequate warning to operators of other vehicles.

PRE-OPERATION CHECKLIST

(OWNER/OPERATOR RESPONSIBILITY)

____ Review and follow safety rules and safety signs on

pages 3 through 17.

____ Check that mower is properly and securely

attached to tractor.

____ Make sure driveline spring-activated locking pin or

locking balls operate freely and are seated firmly in tractor PTO spline groove.

____ Lubricate all grease fitting locations. Make sure

PTO shaft slip joint is lubricated.

____ Check to be sure gear lube runs out the small

check plug on side of gearbox.

____ Check that all hardware is properly installed.

____ Check to ensure blades are sharp and secure and

cutting edge is positioned to lead in a counterclock- wise rotation.

____ Check that all shields and guards are properly

installed and in good condition.

____ Check cutting height, front to rear attitude and top

link adjustment.

____ Place tractor PTO and transmission in neutral

before starting engine.

____ Set tractor PTO gear select lever for 540 rpm

operation.

____ Inspect area to be cut and remove stones,

branches or other hard objects that might be thrown, causing injury or damage.

____ Check that PTO driveline shields are securely

locked and clears the front of the mower frame.

IMPORTANT!

Gearbox was not filled at factory. It must be serviced before operating. Fill to proper level with SAE 90 oil. Failure to service will result in damage to gearbox.

FM 560, FM 572 specifications

The Worksaver FM 560 and FM 572 are advanced agricultural implements designed to enhance efficiency and productivity in various farming operations. These machines are pivotal in delivering superior soil management and cultivation results, catering to the evolving needs of modern agriculture.

The FM 560 is engineered with a working width of 5.6 meters, while the FM 572 boasts an impressive 5.72 meters. Both models feature robust construction, ensuring durability and reliability even in challenging conditions. Built from high-strength materials, these implements can withstand the rigors of intensive farming practices.

One of the standout features of the Worksaver FM series is its adjustable working depth capabilities. Operators can easily set the depth to suit specific soil conditions and crops, allowing for tailored cultivation. This flexibility not only maximizes soil health but also optimizes crop yield. The active tilting mechanism on these models ensures that the implement maintains its position and effectiveness, even on uneven terrain, providing consistent results across fields.

Technologically, the Worksaver FM 560 and FM 572 are equipped with advanced hydraulic systems, enabling smooth operation and quick adjustments in the field. The hydraulic folding system simplifies transport, allowing for easy movement between fields without the need for time-consuming detachment. Additionally, the series includes a variety of interchangeable tines and share options, enabling farmers to customize their setup according to crop and soil type.

Safety is a critical aspect of the design, with features such as a safety shield and automatic overload protection ensuring the well-being of operators and equipment. The FM series also emphasizes ease of maintenance, with accessible components and straightforward servicing procedures, minimizing downtime and enhancing productivity.

In summary, the Worksaver FM 560 and FM 572 are exemplary tools in precision farming, blending innovative technology with practical features to meet contemporary agricultural demands. With their robust build, adjustable settings, and user-friendly operation, these models are ideal choices for farmers seeking to improve soil cultivation and achieve greater yields. The Worksaver FM series represents a commitment to quality and performance, making them invaluable assets in any modern farming operation.