Assembly Instructions

The mower will attach to most tractors with a Category I, 3 pt. hitch system and a 540 RPM PTO. Do not exceed horsepower recommendations.

DANGER!

Operating with PTO speed over 540 RPM can cause excessive vibration and mower failure, which can result in serious injury or even death.

DEALER SET-UP INSTRUCTIONS

Assembly of this mower is the responsibility of the dealer. The mower should be delivered to the owner com- pletely assembled, lubricated and adjusted for normal cutting conditions.

Set-up mower as received from the factory with these instructions.

•Remove mower from crate.

•Complete assembly of factory pre-assembled hitch.

•Refer to parts lists and exploded view drawings for more details.

•To complete assembly, it will be easier if components are aligned and assembled loosely before tightening hardware.

CAUTION!

Always use personal protection devices such as eye and ear protection during assembly.

A-FRAME ATTACHMENT

Refer to the “exploded views” of this manual andfigure

1. Attach the rear brace bars (1) to the lugs on the rear of the deck with the correct hardware. Attach the A-Frame bars (2) to the lugs on the front of the deck. Connect the upper ends of the A-Frame bars with the rear brace bars and swinging top link clevis together with the M12 bolt, washers, spacer and locknut.

3 PT. HITCH ATTACHMENT

Remove bolt from hitch point location and assemble as shown in figure 2.

Figure 2

CASTER WHEEL ATTACHMENT

Some mowers will be supplied with all four wheels fully assembled. However, for models that do require assembly, please follow these instructions. Install two 3/4” spacers on each fork and wheel assembly shaft. Insert fork shaft into axle arm weldment. Additionally install two 3/4” and two 3/8” spacers on each axle shaft and retain using the snapper pins supplied. See figure 3.

Figure 3

Figure 1

DRIVELINE TO MOWER GEARBOX ATTACHMENT

1.Grab and turn the yoke collar of the driveline end to be attached to the gearbox. Note: Make sure that you connect the driveline end with the male shield tube to the mower.

2.Slide the yoke with the collar turned onto the mower’s gearbox input shaft. Note: Make sure that the plastic protective cone is mounted on the gearbox.

3.Move yoke back and forth until its locking pin has engaged on the gearbox input shaft groove.

FM 560, FM 572 specifications

The Worksaver FM 560 and FM 572 are advanced agricultural implements designed to enhance efficiency and productivity in various farming operations. These machines are pivotal in delivering superior soil management and cultivation results, catering to the evolving needs of modern agriculture.

The FM 560 is engineered with a working width of 5.6 meters, while the FM 572 boasts an impressive 5.72 meters. Both models feature robust construction, ensuring durability and reliability even in challenging conditions. Built from high-strength materials, these implements can withstand the rigors of intensive farming practices.

One of the standout features of the Worksaver FM series is its adjustable working depth capabilities. Operators can easily set the depth to suit specific soil conditions and crops, allowing for tailored cultivation. This flexibility not only maximizes soil health but also optimizes crop yield. The active tilting mechanism on these models ensures that the implement maintains its position and effectiveness, even on uneven terrain, providing consistent results across fields.

Technologically, the Worksaver FM 560 and FM 572 are equipped with advanced hydraulic systems, enabling smooth operation and quick adjustments in the field. The hydraulic folding system simplifies transport, allowing for easy movement between fields without the need for time-consuming detachment. Additionally, the series includes a variety of interchangeable tines and share options, enabling farmers to customize their setup according to crop and soil type.

Safety is a critical aspect of the design, with features such as a safety shield and automatic overload protection ensuring the well-being of operators and equipment. The FM series also emphasizes ease of maintenance, with accessible components and straightforward servicing procedures, minimizing downtime and enhancing productivity.

In summary, the Worksaver FM 560 and FM 572 are exemplary tools in precision farming, blending innovative technology with practical features to meet contemporary agricultural demands. With their robust build, adjustable settings, and user-friendly operation, these models are ideal choices for farmers seeking to improve soil cultivation and achieve greater yields. The Worksaver FM series represents a commitment to quality and performance, making them invaluable assets in any modern farming operation.