Genie Z-60, Z-34 Check Engine Light if equipped, Machine Not Level Indicator Light if equipped

Page 31

Sixth Edition · Second Printing

Operator's Manual

 

 

 

 

 

 

Check Engine Light (if equipped)

Light on and engine stopped: Tag the machine and remove from service.

Light on and engine still running: Contact service personnel within 24 hours.

Machine Not Level Indicator Light (if equipped)

Light on indicates the machine is not level. The tilt alarm will be sounding when this light is on. Move the machine to a firm level surface.

Platform Overload Indicator Light (if equipped)

Light flashing indicates the platform is overloaded and no functions will operate.

Remove weight from the platform until the light goes off.

OPERATING INSTRUCTIONS

Fall Protection

Personal fall protection equipment (PFPE) is required when operating this machine.

All PFPE must comply with applicable governmental regulations, and must be inspected and used in accordance with the PFPE manufacturer’s instructions.

After Each Use

1Select a safe parking location—firm level surface, clear of obstruction and traffic.

2Retract and lower the boom to the stowed position.

3Rotate the turntable so that the boom is between the non-steer wheels.

4Turn the key switch to the off position and remove the key to secure from unauthorized use.

5Chock the wheels.

Part No. 1000209

Z-60/34

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsMaximum slope rating, stowed position, 2WD Fall Hazards Collision Hazards Explosion and Fire HazardsBodily Injury Hazards Weld Line to Platform Safety if equippedDamaged Machine Hazards Component Damage HazardsDecal Legend Battery Safety Burn HazardsExplosion Hazard Electrocution HazardPlatform Control Panel ControlsControls Ground Control Panel Page Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionCheck the Engine Oil Level MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Engine Coolant Level Gasoline/LPG Models Check the Hydraulic Oil LevelCheck the Tire Pressure Check the BatteriesScheduled Maintenance At the Ground Controls Function TestsTest Emergency Stop Test Auxiliary Controls At the Platform ControlsTest the Machine Functions Test the Tilt SensorTest the Steering Test the Foot SwitchTest the Hydraulic Oil Return Filter Test the HornTest Drive and Braking Test the Drive Enable SystemTest the Oscillate Axle oscillating axle-equipped models Test the Lift/Drive Select Function if equipped Test Limited Drive SpeedWorkplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsDiesel models Starting the EngineEmergency Stop Gasoline/LPG modelsOperation from Ground Auxiliary ControlsOperation from Platform To determine the slope grade Driving on a slopeEngine Idle Select rpm Drive EnableGenerator if equipped Drive Speed SelectFall Protection Machine Not Level Indicator Light if equippedPlatform Overload Indicator Light if equipped Check Engine Light if equippedInspection for Decals with Words DecalsGround Controls Side Chassis Platform Engine Inspection for Decals with Symbols Ground Controls Side Chassis Platform Engine Transport and Lifting Instructions Free-wheel Configuration for WinchingSecuring the Chassis Securing to Truck or Trailer for TransitSecuring the Platform Chassis Lifting Points Lifting InstructionsChassis Floor loading information Specifications60/34 Range of Motion Distributed By

Z-60, Z-34 specifications

The Genie Z-60 and Z-34 are two of the standout models in Genie’s line of articulating boom lifts, designed for versatility, efficiency, and superior performance. Both models cater to a wide range of applications, from construction and maintenance to industrial and municipal use, ensuring they can meet diverse operational needs.

Starting with the Genie Z-60, this model features a remarkable working height of up to 66 feet and a horizontal outreach of 44 feet. Its impressive lifting capacity of 500 pounds allows for the transport of heavy tools and personnel, making it ideal for tasks that require both reach and strength. The Z-60 is equipped with a proven hydraulic lift system, ensuring smooth operation and reliability. The machine’s tight turning radius enhances maneuverability, allowing it to navigate through congested job sites with ease.

The Genie Z-34, on the other hand, offers a more compact solution with a maximum working height of 40 feet and a horizontal outreach of 21 feet. While it has a slightly lower lifting capacity compared to the Z-60, at 500 pounds, its smaller size allows for access to tighter spaces. The Z-34 is powered by a potent electric drive, making it an excellent choice for indoor applications and noise-sensitive environments.

One of the key features of both models is their advanced articulating boom design, which provides flexible positioning and the ability to reach over obstacles, making them highly effective for complex tasks. The telescopic boom arm allows for greater vertical reach and the ability to position the platform exactly where it's needed. Safety is paramount in the design of both boom lifts, with features such as dual circuit hydraulic systems and standard operator presence sensing systems to ensure worker protection.

Both models come with Genie’s exclusive Active Slope Sense™ technology, which automatically detects the grade angle of the work surface and adjusts the machine's performance accordingly. This feature enhances stability and ensures operators can work safely on varied terrain.

With easy-to-use controls and a compact design, the Genie Z-60 and Z-34 offer reliable solutions for professionals looking to optimize their lifting capabilities while ensuring safety and efficiency. Whether on a construction site, in a warehouse, or at a municipal facility, these boom lifts deliver performance and reliability to meet modern-day challenges. Their combination of innovative technology and robust engineering makes them essential tools in today’s mechanized work environment.
Top Page Image Contents