Crown Audio MA-2402 operation manual Specifications, 120 VAC, 60 Hz Units, Bridge mono mode

MA 2402 Power Amplifier

8 Specifications

Minimum Guaranteed Power	Macro-Tech 2402
120 VAC, 60 Hz Units, Stereo mode, per channel, both channels driven
1 kHz with 0.1% THD
Stereo, 2 ohms per ch.	1,050 W
Stereo, 4 ohms per ch.	800 W
Stereo, 8 ohms per ch.	520 W
120 VAC, 60 Hz Units, Bridge mono mode
1 kHz with 0.1% THD
4 ohms	2,070 W
8 ohms	1,585 W
16 ohms	1,035 W
120 VAC, 60 Hz Units, Parallel mono mode
1 kHz with 0.1% THD
1 ohm	2,080 W
2 ohms	1,605 W
4 ohms	1,035 W

Performance	Macro-Tech 2402
Frequency Response (at 1 watt, 20 Hz - 20 kHz)	± 0.1 dB
Phase Response (at 1 watt, 10 Hz - 20 kHz)	± 10°
Signal to Noise Ratio below rated full bandwidth power
20 Hz to 20 kHz	> 100 dB
A-weighted	> 105 dB
Total Harmonic Distortion (THD) at rated power, from 20 Hz to 1 kHz	< 0.05%
Total Harmonic Distortion (THD) at rated power, at 20 kHz	0.1%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1,	< 0.05%
from 163 milliwatts to full bandwidth power
Damping Factor: 10 Hz to 400 Hz	> 1000
Crosstalk (below rated power, 20 Hz to 1 kHz)	> 85 dB
Controlled Slew Rate	> 13 volts/microsecond
Input Impedance (nominal) balanced, unbalanced	20 k ohms, 10 k ohms

Operation Manual page 21