Installation Instructions

TOOLS REQUIRED: 7/16” wrench, 3/4" socket and ratchet, screwdriver.

Refer to the parts list and drawing on pages 8 and 9.

WHEEL INSTALLATION

1.Slide 1/2” x 4.50” bolt (item 41) through the wheel (item 33),then through the wheel bracket, with the offset side of the wheel hub against the wheel bracket.

2.On left side, thread 1/2” nyloc nut (item 42) onto the bolt and tighten. On right side, thread lock washer (item 46) and foot bar (item 47) onto the bolt and tighten. Use screwdriver through hole in bar for leverage.

FOOT INSTALLATION

1.Assemble the foot (item 44) to the carrier channel using a 1/4” x 1.75” bolt (item 43). Thread a 1/4” washer

(item 17) and a 1/4” nyloc nut (item 15) onto the bolt to secure the assembly.

Caution: Do not over tighten so that the foot material collapses.

2.Repeat above instructions for the remaining foot.

HANDLE INSTALLATION

1.Slide the reduced ends of the handle (item 18) into the upright tubes of the base as shown in the diagram.

2.Install the 1/4” x 1.50” bolts (item 45) through the tubes from the outside.

3.Thread the 1/4” nyloc nuts (item 15) onto the bolts and tighten.

NOTE: Do not over tighten.

IDLE CONTROL OPERATION

The Idle Control circuit is designed to extend engine life and improve fuel usage by slowing the engine down to approximately 2000 RPM in a “No Load” condition. The noise is also greatly reduced during this condition.

When power is required from the generator an electronic control module automatically senses current flow in the electrical outlet and allows the engine to return to full speed or standard operating condition. Likewise, when the load is removed, the generator will automatically return to the idle condition after a 4-5 second delay.

A convenient switch is mounted in the control panel for easy access and will disable the Idle Control circuitry when in the off position.

IDLE CONTROL TROUBLE SHOOTING

PROBLEM	POSSIBLE CAUSE	SOLUTION
Unit will not idle	Control panel switch not on	Turn to idle on position
	Load plugged into receptacle	Unplug load
	Poor connection or faulty cord	Check & repair
	Bad I.C. module; Bad electro-magnet	Replace
	or solenoids; Bad stator
		Consult dealer
Unit idles even with load plugged in	Load not heavy enough	Turn idle switch to off position
		Increase load
	Bad I.C. module	Replace
		Consult dealer
Unit tries to idle but won’t stay latched	Electro-magnet or solenoid position	Reset magnet or solenoid position for
	incorrect	2000 RPM idle speed
		Consult dealer
	Flapper bracket loose or bent	Tighten or straighten
		Replace flapper. Readjust to 2000 RPM
	Engine not running smoothly	Adjust carburetor
		Consult dealer

English

PM0463302 specifications

The Powermate PM0463302 is a versatile and robust generator designed to meet the power needs of both residential and commercial users. With its ample power output and innovative features, the PM0463302 stands out in the crowded market of portable generators.

One of the main highlights of the Powermate PM0463302 is its powerful engine. Equipped with a reliable 4-stroke engine, it provides a maximum output of 4500 watts, making it suitable for a variety of applications, from powering essential household appliances during outages to supporting tools on job sites. This generator is designed to deliver consistent and reliable power, allowing users to count on it when they need it most.

The PM0463302 also incorporates advanced technologies that enhance its performance. With a user-friendly control panel, the generator features multiple outlets, including two 120V household outlets and a 12V DC outlet for battery charging. The integrated circuit breaker ensures safety by preventing overloads, while the powered start offers ease of use, eliminating the hassle of manual pull-starting.

Portability is another key characteristic of the Powermate PM0463302. It is mounted on a sturdy steel frame with a set of flat-free tires, allowing users to easily transport the generator across various terrains. The compact design ensures that it can be conveniently stored in a garage or shed when not in use.

Fuel efficiency is a noteworthy aspect of the PM0463302, with a sizable fuel tank that holds up to 4 gallons of gasoline. This capacity provides an extended runtime, enabling users to operate essential appliances for hours without frequent refueling. Additionally, the generator is equipped with eco-friendly features that reduce emissions, which is increasingly important for environmentally-conscious consumers.

Noise levels are kept to a minimum with the Powermate PM0463302, allowing it to be used in residential areas without causing disturbance. This makes it an ideal choice for camping trips, outdoor events, or as a home backup solution.

With its combination of power, portability, and user-friendly design, the Powermate PM0463302 is a strong contender in the generator market, ensuring that users have reliable power solutions when they need them most. Whether for emergency preparedness or daily use, this generator is equipped to handle a wide range of power requirements efficiently and effectively.