Subaru Robin Power Products R1700i service manual Recoil Starter, Disassembly procedures

Page 39

5-5) RECOIL STARTER

Tools used : Long-nose pliers, retaining-ring pliers, protective goggles

Caution :

Please wear protective goggles before starting disassembly

1) Disassembly procedures

(1) Unhook the spring.

-1 Hold the starter handle, and pull out the starter rope.

-2 Pull out all of the rope, and align the rope guide and the knot of the rope inside the reel.

-3 Be sure to hold the reel with both thumbs so your fingers do not become be entangled.

-4 Pull the knot of the rope out from the reel, loosen the knot, then pull it up from the starter handle side (this should be done by two people).

-5 Slowly rewind the rope until the reel stops while controlling the reel with both thumbs.

Starter rope

Starter handle

Caution :

The pull of the spring is maximized while the rope is fully pulled out. Please do not release it suddenly, or relax your grip.

– 36 –

Image 39

Contents Generator Page Contents R1700i SpecificationsExternal View General DescriptionControl Panel Engine SwitchOIL Sensor Lamp AC Receptacles Generator Assembly Incandescent lamp, heater, etc. with a power factor Mercury lamps with a smaller power factorRange of Applications Wattage Appliances without any indication as to power consumptionCross Allowable Cable Voltage drops per 30 meters of cable Instruments Measuring and Checking ProceduresCircuit Tester Dr.RobinPartNumber388-47565-08 Dr.RobinMeasuring Insulation Resistance AC Output MeasuringAlternator （1）STATOR Checking Functional MembersDiode Rectifier Oil capacity 0.4 liters Below the lower level on continuityAssembly and Disassembly PrecautionsSpecial Tools Remove the rear cover Disassembly ProceduresRemove rolling wire, choke wire Remove the side panels Left, RightUpper part of the case body Remove the recoil starter handleRemove the control panel Remove the case body Left, RightRemove rear frame Remove fuel cock bracketRemove the fuel tank Remove the fuel pipes Remove the inverter unitRemove the air cleaner and carburetor Remove the front frameRemove the base inverter Remove the rotor Remove the Stator / Rear coverRemove Blower housing Remove the flywheelRemove recoil starter Remove the muffler Remove the ignition coilRemove the cylinder baffle Reassembly Procedures Air gap adjustment of flywheel and pulsar coil Recoil starterAir gap 0.5 mm Blower housing Pulsar coil and grommetTightening torque 3.0-5.0 N・m 30-50 kgf・cm 3.7 ft・lbs Rear cover, stator RotorFront frame Air cleaner bottom plate and carburetorBase Inverter Tightening torque 90-110 Kgf ・cm 8.1 Ft ・lbsTightening torque 3.0-4.0 N・m 30-40 kgf・cm 2.2-2.9 ft・lbs Installing couplerFuel pipe Inverter unitFuel cock bracket Fuel tankCase body, control panel Rear cover Choke wire and rolling wireRecoil Starter Disassembly proceduresDisassembly is completed Assembly procedure About 20cm Fixed hole Rope Cut of the reel Pull off hole Checking items after assembly When No output power or Lower output TroubleshootingImproper revolutions Electronic throttle Engine does not start Start failure R1700i 50Hz-230V Wiring DiagramR1700i 50Hz-240V R1700i 60Hz-120V Page Lively Blvd. Wood Dale, IL 60191 Phone 630-350-8200 Fax

R1700i specifications

The Subaru Robin Power Products R1700i is a high-performance inverter generator designed to provide reliable and efficient power for both recreational and professional use. It is particularly popular among outdoor enthusiasts, campers, and contractors due to its compact size, lightweight nature, and advanced technologies.

One of the most notable features of the R1700i is its inverter technology. This allows the generator to produce clean, stable power with a low total harmonic distortion (THD), which is crucial for sensitive electronics such as laptops, smartphones, and communication devices. The inverter system ensures that the power output remains consistent, adapting to the load demand to deliver the exact amount of power required, enhancing fuel efficiency and extending runtime.

The R1700i is equipped with a powerful Subaru engine that delivers reliable performance with a maximum output of 1,700 watts. The engine is designed for durability and longevity, making it capable of handling various power needs. Its efficient design ensures that users can enjoy longer operation times on a single tank of fuel, which is a critical advantage for those who need extended power for their activities.

Another key characteristic of the R1700i is its lightweight and portable design. Weighing only around 37 pounds, it can be easily transported, making it ideal for camping trips, tailgating, or construction sites where mobility is essential. The generator features a sturdy handle for easy lifting and maneuvering, as well as a compact footprint that allows it to fit in tight spaces.

The Subaru Robin R1700i also includes several user-friendly features, such as an easy-start system, an eco-mode for enhanced fuel efficiency, and a quiet operation that minimizes noise pollution. It operates at a relatively low noise level, making it suitable for environments where quiet is necessary, such as during outdoor gatherings or in residential areas.

Safety is also a priority with the R1700i, as it comes with built-in protection features, including overload protection and low oil alert, ensuring that users can operate the generator with peace of mind.

In summary, the Subaru Robin Power Products R1700i combines power, portability, and advanced technology, making it an excellent choice for anyone in need of a reliable and efficient inverter generator. Its blend of features makes it suitable for a wide array of applications, providing users with the confidence to tackle various power challenges while enjoying the great outdoors or completing essential tasks.