1.Wiringdiagram
KEYSWITCH
GENERATOR
ELECTRIC STARTE
1) Circulation | 12V35AH |
When starting by the electric starter, (Keyis at the position of start.)
Battery
Charging, operating (Key is at the position of operation.)
Generator "f Rectifier + IC of key +. BAT of key +. Battery (+)
2.Lead wire for electricstarter
When mounting the engine, location of the battery may comes into question, but setleadthe wire followingmethod:
BATTERYSTARTERELECTRICStDETERMINAL | SIDE TERMINAL |
JIS | JIS |
3.Earth band Plain woven lead wire sectional area 20 mm2 and up.
I"
Approx. 25
L
Fasten tightly to the place made of metal and not paint coated. Theplace must be electrically conducted completely to the crankcase of the engine.
4, Other remarks
1)All lead wires are classified by coloring, so when connecting, select and connect by color. Meantime, insert the connectors each other uptill the roots.
2)The wire from (+)terminal of the battery must be connected t o (+)terminal of the electric starter, and thewire from the
3)Select the wire from the below Table A, based on the required length of the wire.
4)When thekey switch is setapartfromthe engine body, select the wire from belowTable B, based on the required
length of the wire between the key switch and the magnetic switchon the side of engine.
| I | Outside dia. |
|
| Outside dia. |
Length | Description | Length. | Description | ||
1.5 m or shorter | AV15 | 7.3 mm | 1.5 m or shorter | A V 1 | 1.5 mm |
m | AV20 1.5 | 8.5mm | A V 2 | 1.9 mm | |
2.5 m | AV30 | 10.8 mm | 3 m" 5 m | A V 3 | 1.4 mm |
Table | Table A | - | B |
| |
|
|
|
|
I-
,"-