Black & Decker VEC027BD user manual Volt DC Specifications, AC Power Specifications

Page 8

VEC027BD_ManualEN_122805 12/28/05 2:37 PM Page 10

SPECIFICATIONS

12 Volt DC Specifications

Battery:	12 volt DC rechargeable, maintenance-free
Internal Battery Type:	Sealed, AGM lead-acid
Internal Battery
Capacity:	12 volt 19Ah/20 hour rate
Area Light :	Light Emitting Diode (LED)
Jumper Cables:	Heavy duty welding cable with 450 amp clamps
Accessory Outlet
Protection:	5 amp, dual self-resetting breakers
DC Charging Adapter:	12 volt DC

AC Power Specifications

Output Power:	Continuous — 300 watts
Output Voltage:	120 VAC RMS
Output Frequency:	60 Hz ±4 Hz
Output Waveform:	Modified sine wave
Overheat Protection:	Yes
Overload Protection:	Yes
Output Short Circuit
Protection:	Yes

Tire Inflator Specifications

Maximum Pressure:

120 PSI

Battery Charger Specifications

Input:	120 volt AC, 60 Hz
Rapid Charging
Current:	12 volt DC 1000mA

10

11

Image 8

Contents Electromate Plus Important Safety Instructions Table of Contents Protective Features Viewing Battery Charge StatusAC and DC CHARGING/RECHARGING Volt AC ChargingUsing the Electromate Plus AS a JUMP-STARTER Using the Alternator Check FeatureUsing the 12 Volt DC Portable Power Supply DC Power Supply PanelUsing the Tire Inflator Using the 120 Volt AC Power SupplyUsing the Emergency Area Light Care and Maintenance Replacement PartsFuse Replacement DC Accessory Adapter Inflating Products Without a Valve StemSpecifications Volt DC SpecificationsAC Power Specifications Tire Inflator Specifications