Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

To prevent serious injury:

Operate only with proper spark arrestor installed. Operation of this equipment may create sparks that can start fires around dry vegetation.

A spark arrestor may be required.

The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

Starting the Engine

Inspect engine and equipment looking for damaged, loose, and missing parts before

set up and starting. If any problems are found, do not use equipment until fixed properly.

Before starting, first familiarize yourself with proper shut down and emergency shut down procedures.

Checking and Filling Engine Oil

low engine oil WILL permanently damage the engine. Check the oil level with the engine stopped and in a level position.

1.Wipe dipstick exterior with a clean cloth. Remove the dipstick and wipe it off with a clean rag. Pour engine oil into the oil fill hole until the level of oil is even with the bottom edge of the oil fill hole (if you cannot see the oil through the oil fill hole, then the oil is too low and more oil must be added).

2.Reinsert the dipstick into the oil filler neck, but do not screw in; then remove it to check the oil level. The oil level should reach the upper limit

(H) mark on the dipstick (bottom edge of the oil fill hole).

3.If the oil level is not to the upper limit mark (bottom edge of the oil fill hole), add the appropriate type of oil until the oil level reaches the upper limit mark.

THIS GENERATOR HAS AN AUTO-SHUTDOWN OIL SENSOR. IF ENGINE STOPS OR WILL NOT START, CHECK OIL LEVEL.

Engine Oil	SAE 10W-30 above 32°F
Engine Oil	SAE 5W-30 at 32°F or below

4.Replace the Oil Dipstick.

CAUTION! Your Warranty is VOID if the engine’s crankcase is not properly filled with oil before each use. Before each use, check the oil level. Do not run the engine with low or no engine oil. Running the engine with no or

The Oil Sensor will automatically shut down the engine before the oil level falls below the safe/low limit. To avoid nuisance tripping of the Oil Sensor and damage to property, check that the oil level is at the

SKU 67561

For technical questions, please call 1-800-444-3353.

Page 10

67561 specifications

The Chicago Electric 67561 is a versatile and reliable addition to any woodworker's toolkit. This all-in-one tool combines the functions of planning and shaping, making it an ideal choice for both amateur and professional woodworkers. Recognized for its durability and performance, the 67561 stands out in the crowded market of woodworking equipment.

One of the main features of the Chicago Electric 67561 is its powerful motor. Equipped with a robust 6.5 amp motor, this tool delivers consistent performance across a variety of tasks. Whether you are dealing with softwoods or hardwoods, the motor ensures a smooth operation, allowing for precise planning and shaping without stalling.

The 67561 is designed with ease of use in mind. Its ergonomic handle offers a comfortable grip, reducing fatigue during prolonged use. Additionally, it features a simple and intuitive control layout that makes adjustments straightforward, enabling woodworkers to switch between settings with minimal disruption to their workflow.

This tool is also packed with advanced technologies that enhance its capabilities. The adjustable depth control allows users to make precise cuts based on their specific project needs. This feature is particularly beneficial for those looking to achieve a professional finish or to make intricate designs. The onboard dust port helps keep the workspace clean by connecting to a vacuum system, which is a significant advantage in maintaining a safe and tidy environment.

Another impressive characteristic of the Chicago Electric 67561 is its lightweight design. Weighing in at just over 7 pounds, it is easy to maneuver and navigate around larger projects without causing undue strain. This portability makes it an excellent choice for those who frequently transport their tools to different job sites or workshops.

Users have praised the value that the Chicago Electric 67561 offers. Its competitive pricing combined with a well-rounded feature set makes it accessible for hobbyists while still satisfying the demands of professional tradespeople. The tool also benefits from a reputation for reliability, meaning owners can trust it to handle the rigors of daily woodworking tasks effectively.

In conclusion, the Chicago Electric 67561 is a high-performing tool that combines durability, powerful motor capability, and user-friendly features. Its design and technology make it suitable for a wide range of woodworking applications, making it a worthwhile investment for anyone serious about their craft.