Chicago Electric 67561 manual Technical Specifications, Servicing, Maintenance Procedures

Page 14

Technical

Specifications

Engine Type

4 Stroke, OHV

Bore x Stroke

70 x 54mm

Compression Ratio

8.5:1

Displacement

208cc

 

Type

91+ octane premium

Fuel

unleaded gasoline

 

 

Capacity

4 Gallons

 

 

SAE 10W-30 above 32° F

Engine Oil

Type

SAE 5W-30 at 32° F or

 

 

below

 

Capacity

2/3 Quarts

Spark

Compatible

NGK BP61S

Types

Bosch W6DC

Plug

Champion N11YC

 

 

Gap

0.024~0.031”

Valve

Intake

0.1mm

Clearance

Exhaust

0.15mm

Speed

 

3600 RPM

Servicing

To prevent serious injury

from accidental starting:

Turn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and disconnect the spark plug wire(s) before performing any inspection, maintenance, or cleaning procedures.

To prevent serious injury

from equipment failure: Do not use damaged equipment. If abnormal noise, vibration, or excess smoking occurs, have the problem corrected before further use.

Maintenance Procedures

Many maintenance procedures, including those not detailed in this manual, will need to

be performed by a qualified technician for safety. If you have any doubts about your ability to safely service the equipment or engine, have a qualified technician service the equipment instead.

Note: Warranty is void if proper maintenance and servicing procedures are not followed.

Engine Oil Change

CAUTION! Oil is very hot during operation and can cause burns. Wait for engine to cool before changing oil.

1.Place a drain pan (not included) underneath the crankcase’s drain plug.

2.Remove the Drain Plug (1a) and, if possible, tilt the crankcase slightly to help drain the oil out. Recycle used oil.

3.If the Drain Plug Washer (2a) is damaged, replace with a new Washer.

4.Re-install the Drain Plug and tighten it in place.

5.Refill the oil to the proper level following the instructions under the Starting the Engine section.

Air Filter Element Maintenance

1.Wipe off the air cleaner cover.

SKU 67561

For technical questions, please call 1-800-444-3353.

Page 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For technical questions or replacement parts, please call Gasoline generatorContents Set up precautions Save This ManualOperating precautions Carbon Monoxide Hazard Using an engine indoorsFor technical questions, please call Service precautions AC ApplicationsFeet Extension CordsSee Table a Functions Basic SpecificationsUnpacking Controls VDC OutletOperating Instructions Starting the EngineSKU For technical questions, please call Equipment Operation Control Panel Features Air Filter Element Maintenance Technical SpecificationsMaintenance Procedures ServicingCleaning Cleaning, Maintenance, Lubrication Schedule StorageFor technical questions, please call Engine Troubleshooting Engine System Possible Cause Possible SolutionEngine not run Equipment Troubleshooting Problem Possible Causes Probable SolutionsPart Description Qty Main Assembly Diagram Parts List and Diagram a Crankcase Assembly Description QtyParts List and Diagram B Cylinder Head Assembly Description Qty Description Qty Parts List and Diagram E Air Cleaner and Muffler Assembly Parts List and Diagram F Fuel Supply SystemParts List and Diagram G Starter and Generator Assembly Record Product’s Serial Number HereWiring Diagram Limited 1 year / 90 Day Warranty Emission Control System WarrantyOwner’s Warranty Responsibilities

67561 specifications

The Chicago Electric 67561 is a versatile and reliable addition to any woodworker's toolkit. This all-in-one tool combines the functions of planning and shaping, making it an ideal choice for both amateur and professional woodworkers. Recognized for its durability and performance, the 67561 stands out in the crowded market of woodworking equipment.

One of the main features of the Chicago Electric 67561 is its powerful motor. Equipped with a robust 6.5 amp motor, this tool delivers consistent performance across a variety of tasks. Whether you are dealing with softwoods or hardwoods, the motor ensures a smooth operation, allowing for precise planning and shaping without stalling.

The 67561 is designed with ease of use in mind. Its ergonomic handle offers a comfortable grip, reducing fatigue during prolonged use. Additionally, it features a simple and intuitive control layout that makes adjustments straightforward, enabling woodworkers to switch between settings with minimal disruption to their workflow.

This tool is also packed with advanced technologies that enhance its capabilities. The adjustable depth control allows users to make precise cuts based on their specific project needs. This feature is particularly beneficial for those looking to achieve a professional finish or to make intricate designs. The onboard dust port helps keep the workspace clean by connecting to a vacuum system, which is a significant advantage in maintaining a safe and tidy environment.

Another impressive characteristic of the Chicago Electric 67561 is its lightweight design. Weighing in at just over 7 pounds, it is easy to maneuver and navigate around larger projects without causing undue strain. This portability makes it an excellent choice for those who frequently transport their tools to different job sites or workshops.

Users have praised the value that the Chicago Electric 67561 offers. Its competitive pricing combined with a well-rounded feature set makes it accessible for hobbyists while still satisfying the demands of professional tradespeople. The tool also benefits from a reputation for reliability, meaning owners can trust it to handle the rigors of daily woodworking tasks effectively.

In conclusion, the Chicago Electric 67561 is a high-performing tool that combines durability, powerful motor capability, and user-friendly features. Its design and technology make it suitable for a wide range of woodworking applications, making it a worthwhile investment for anyone serious about their craft.
Top Page Image Contents