Storage

Cleaning, Maintenance, and

Lubrication Schedule

Note: This maintenance schedule is intended solely as a general guide. If performance decreases or if equipment operates unusually, check systems immediately. The maintenance needs of each piece of equipment will differ depending on factors such as duty cycle, temperature, air quality, fuel quality, and other factors.

Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the engine and equipment.

After Initial 20 Operation Hour Period:

a. Change engine oil.

Every 25 Operation Hours Thereafter:

a. Clean/replace air filter element.

b. Inspect/clean spark plug.

Every 50 Operation Hours:

a. Change engine oil.

b. Replace fuel filter (if equipped).

c. Check spark plug. Clean and re-gap as needed.

Every 100 Operation Hours:

a. Replace spark plug.

b. Replace air filter element.

c. Clean fuel tank and fuel strainer.

Note: All maintenance procedures scheduled for 25, 50, and 100 operation hours should be performed at least yearly.

Every 300 Operation Hours:

a. Clean fuel tank and carburetor.

b. Clean carbon build-up from combustion chamber.

c. Check oil tube condition and replace as needed.

1.Wait for engine to cool, then clean engine with clean cloth.

2.When the equipment is to remain idle for longer than 20 days, prepare the engine for storage as follows:

a.Change engine oil and empty fuel tank.

b.Either leave fuel tank empty or refill fuel tank with fresh unleaded gasoline mixed with a fuel stabilizer intended for long term engine storage (not included). After filling, run engine for about 5-10 minutes to circulate the treated gasoline through the carburetor. Wait for engine to cool before proceeding.

c.Clean out area around spark plug. Remove spark plug and pour one tablespoon of engine oil into cylinder through spark plug hole.

d.Reinstall spark plug, but leave spark plug wire disconnected.

e.Pull recoil starter to distribute oil in cylinder. Stop after one or two revolutions when you feel the piston start the compression stroke (when you start to feel resistance).

f.Disconnect battery cables (if equipped).

3.Apply a thin coat of rust preventive oil to all uncoated metal parts.

SKU 67561

For technical questions, please call 1-800-444-3353.

Page 16

67561 specifications

The Chicago Electric 67561 is a versatile and reliable addition to any woodworker's toolkit. This all-in-one tool combines the functions of planning and shaping, making it an ideal choice for both amateur and professional woodworkers. Recognized for its durability and performance, the 67561 stands out in the crowded market of woodworking equipment.

One of the main features of the Chicago Electric 67561 is its powerful motor. Equipped with a robust 6.5 amp motor, this tool delivers consistent performance across a variety of tasks. Whether you are dealing with softwoods or hardwoods, the motor ensures a smooth operation, allowing for precise planning and shaping without stalling.

The 67561 is designed with ease of use in mind. Its ergonomic handle offers a comfortable grip, reducing fatigue during prolonged use. Additionally, it features a simple and intuitive control layout that makes adjustments straightforward, enabling woodworkers to switch between settings with minimal disruption to their workflow.

This tool is also packed with advanced technologies that enhance its capabilities. The adjustable depth control allows users to make precise cuts based on their specific project needs. This feature is particularly beneficial for those looking to achieve a professional finish or to make intricate designs. The onboard dust port helps keep the workspace clean by connecting to a vacuum system, which is a significant advantage in maintaining a safe and tidy environment.

Another impressive characteristic of the Chicago Electric 67561 is its lightweight design. Weighing in at just over 7 pounds, it is easy to maneuver and navigate around larger projects without causing undue strain. This portability makes it an excellent choice for those who frequently transport their tools to different job sites or workshops.

Users have praised the value that the Chicago Electric 67561 offers. Its competitive pricing combined with a well-rounded feature set makes it accessible for hobbyists while still satisfying the demands of professional tradespeople. The tool also benefits from a reputation for reliability, meaning owners can trust it to handle the rigors of daily woodworking tasks effectively.

In conclusion, the Chicago Electric 67561 is a high-performing tool that combines durability, powerful motor capability, and user-friendly features. Its design and technology make it suitable for a wide range of woodworking applications, making it a worthwhile investment for anyone serious about their craft.