Chicago Electric 67561 manual Checking and Filling Fuel, SKU For technical questions, please call

Page 11

bottom edge of the oil fill hole before each start-up.

CAUTION! DO NOT run the engine with low oil or no oil; the engine will be permanently damaged.

Checking and Filling Fuel

1.Check the fuel level. If the fuel level is more than 1” below the fill neck of the fuel tank, add more fuel.

Note: Do not overfill the fuel tank.

WARNING! To prevent serious injury from fire:

Fill the fuel tank in a well- ventilated area away from ignition sources. Do not smoke.

2.To fill the Fuel Tank, first wipe off the

Fuel Tank Cap and the surrounding area.

3.Unscrew, and remove the Fuel Tank Cap.

4.Mix fuel stabilizer (not included) with 91 octane (or better) premium unleaded gasoline according to fuel stabilizer directions.

Note: Use only premium octane unleaded gasoline.

5.Fill the Fuel Tank to about 1 inch under the fill neck of the gasoline tank with the stabilized unleaded gasoline mixture.

6.Then replace the Fuel Tank Cap.

Start Procedure

Before starting the engine: a. Inspect the equipment and

engine.

b. Fill the engine with the proper amount and type of fuel and oil.

c. Read the Equipment

Operation section that follows.

1.Unplug loads from the Generator and make sure the AC Circuit Breaker Switch is in the OFF position before starting to prevent permanent generator damage.

2.Turn the engine fuel valve to its ON or OPEN position.

3.Turn the Engine Power Switch to its ON or RUN position.

4.Then, turn the engine choke lever to its “CHOKE” position. Set the choke lever in the “RUN” position when starting a warm engine.

5.Grasp the starter handle, and pull slowly until resistance is felt. While holding the handle, allow the starter rope to rewind. Then, pull the starter handle with a rapid, full arm stroke. Once again while holding the handle, allow the rope to rewind. Repeat as necessary, until the engine starts.

6.After the engine starts and warms up, slowly move the choke lever to its

“RUN” position.

IMPORTANT: Allow the engine to run at no load until warm (1-5 minutes) to stabilize.

7.Move the AC Circuit Breaker Switch to its ON or RUN position.

SKU 67561

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Gasoline generator For technical questions or replacement parts, please callContents Save This Manual Set up precautionsCarbon Monoxide Hazard Using an engine indoors Operating precautionsFor technical questions, please call AC Applications Service precautionsFeet Extension CordsSee Table a Functions Basic SpecificationsUnpacking VDC Outlet ControlsStarting the Engine Operating InstructionsSKU For technical questions, please call Equipment Operation Control Panel Features Servicing Technical SpecificationsMaintenance Procedures Air Filter Element MaintenanceCleaning Storage Cleaning, Maintenance, Lubrication ScheduleFor technical questions, please call Engine System Possible Cause Possible Solution Engine TroubleshootingEngine not run Problem Possible Causes Probable Solutions Equipment TroubleshootingPart Description Qty Main Assembly Diagram Description Qty Parts List and Diagram a Crankcase AssemblyParts List and Diagram B Cylinder Head Assembly Description Qty Description Qty Parts List and Diagram F Fuel Supply System Parts List and Diagram E Air Cleaner and Muffler AssemblyRecord Product’s Serial Number Here Parts List and Diagram G Starter and Generator AssemblyWiring Diagram Emission Control System Warranty Limited 1 year / 90 Day WarrantyOwner’s Warranty Responsibilities

67561 specifications

The Chicago Electric 67561 is a versatile and reliable addition to any woodworker's toolkit. This all-in-one tool combines the functions of planning and shaping, making it an ideal choice for both amateur and professional woodworkers. Recognized for its durability and performance, the 67561 stands out in the crowded market of woodworking equipment.

One of the main features of the Chicago Electric 67561 is its powerful motor. Equipped with a robust 6.5 amp motor, this tool delivers consistent performance across a variety of tasks. Whether you are dealing with softwoods or hardwoods, the motor ensures a smooth operation, allowing for precise planning and shaping without stalling.

The 67561 is designed with ease of use in mind. Its ergonomic handle offers a comfortable grip, reducing fatigue during prolonged use. Additionally, it features a simple and intuitive control layout that makes adjustments straightforward, enabling woodworkers to switch between settings with minimal disruption to their workflow.

This tool is also packed with advanced technologies that enhance its capabilities. The adjustable depth control allows users to make precise cuts based on their specific project needs. This feature is particularly beneficial for those looking to achieve a professional finish or to make intricate designs. The onboard dust port helps keep the workspace clean by connecting to a vacuum system, which is a significant advantage in maintaining a safe and tidy environment.

Another impressive characteristic of the Chicago Electric 67561 is its lightweight design. Weighing in at just over 7 pounds, it is easy to maneuver and navigate around larger projects without causing undue strain. This portability makes it an excellent choice for those who frequently transport their tools to different job sites or workshops.

Users have praised the value that the Chicago Electric 67561 offers. Its competitive pricing combined with a well-rounded feature set makes it accessible for hobbyists while still satisfying the demands of professional tradespeople. The tool also benefits from a reputation for reliability, meaning owners can trust it to handle the rigors of daily woodworking tasks effectively.

In conclusion, the Chicago Electric 67561 is a high-performing tool that combines durability, powerful motor capability, and user-friendly features. Its design and technology make it suitable for a wide range of woodworking applications, making it a worthwhile investment for anyone serious about their craft.
Top Page Image Contents