Poulan PR5524ESLCT, 424704 owner manual Table of Contents

Page 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impel- ler and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the engine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16.Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufac- tured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECAL ATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

2 Quarts (1,89 Liters)

and Type:

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 50°F)

(API SG–SL):

SAE 5W-30 or 10W-30

 

(32° to 50°F)

 

SAE 5W-30 (below 32°F)

 

 

Oil Capacity:

20 Ounces (0,57 Liters)

 

 

Spark Plug:

Champion RN9YC

Gap:

0.030" (0,762 mm)

 

 

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and using your snow thrower.

Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

 

MAINTENANCE

13-14

PRODUCT SPECIFICATIONS

3

 

SERVICE AND ADJUSTMENTS

15-17

CUSTOMER RESPONSIBILITIES

3

 

STORAGE

17

ASSEMBLY / PRE-OPERATION

4-7

 

TROUBLESHOOTING

18

OPERATION

8-12

 

REPAIR PARTS

20-37

MAINTENANCE SCHEDULE

13

3

WARRANTY

BACK COVER

Image 3
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerElectric start button used for starting the engine Meets A.N.S.I. Safety RequirementsTo USE Choke Control See Fig HOW to USE Your Snow ThrowerStopping To USE Fuel SHUT-OFF Valve See FigUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine If Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingLubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Service Notes Exploded KEY Part Description Scrapper BAR Auger HousingAuger Assembly LH Auger Assembly RHBouchon PALIER, TarièreStrap Chute WeldmentDeflector Weldment Deflector SealPulley Pivot LEVER/CABLE Rotator AssemblyRotator Head Rotator Pivot BracketPivot Support Weldment Panel Bracket LH Panel Bracket RHHandle Grip Lower HandleHandle Knob SpacerRetainer Knob REDCarriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Flood Headlight Wire HarnessConsole Panel Headlight BezelItem 43 Exploded Control ARM Speed Selector Assembly43 402689 Drive Plate Assembly END PlateClik PIN Axle ShaftRoll PIN 3/16 Sprocket423184X428 Engine Mount Plate KEY Part Description Engine LCT Model PLMHK18600781DEBelt Cover Traction BeltImpeller Belt Wheel Assembly LH Repair Parts Snow Thrower - Model Number PR5524ESLCT WheelsWrench Power CordSafety Ignition KEY Retainer PINDECAL, Instruction DECAL, DangerDecal DECAL, DANGER, DeflectorService Notes Service Notes Limited Warranty

PR5524ESLCT, 424704 specifications

The Poulan PR5524ESLCT is a robust and efficient gas-powered lawn mower designed to make yard work a breeze. Featuring a powerful 140cc engine, this machine provides effective cutting performance for a variety of grass types and conditions. Its ability to tackle tough lawns with ease makes it a favorite among homeowners and landscaping professionals alike.

One of the standout features of the PR5524ESLCT is its 22-inch cutting deck. This ample cutting size allows for wider paths, reducing the time spent mowing and ensuring a cleaner cut. The deck is constructed from durable materials that can withstand harsh conditions, providing long-lasting reliability. Additionally, its cutting height adjustment is easily operated with a single lever, allowing users to customize their mowing experience with six different height settings.

Equipped with the Easy Start technology, the Poulan PR5524ESLCT is designed for effortless ignition. This feature significantly reduces the hassle of traditional starting methods, enabling users to get right to work without wasted time. The mower's engine is engineered for optimal fuel efficiency, which translates to longer run times between refueling.

Another remarkable feature of this model is its rear bagging and mulching capabilities. The mower comes with a rear bag that collects grass clippings for easy disposal, helping to maintain your lawn's pristine appearance. For those who prefer to return nutrients to the soil, the mulching function finely chops grass clippings, promoting a healthier lawn.

The PR5524ESLCT also boasts a rugged design that emphasizes user comfort. Its lightweight construction allows for easy maneuverability, while the ergonomically designed handles reduce user fatigue during longer mowing sessions. The folding handle feature facilitates compact storage, saving space in your garage or shed.

Safety is a top priority, and this mower is equipped with a safety guard that helps prevent accidental starting. It also includes a reliable braking system for added peace of mind. With its combination of power, efficiency, and user-friendly features, the Poulan PR5524ESLCT is an excellent choice for anyone looking to maintain a beautiful lawn effortlessly. Whether you’re a seasoned lawn care professional or a homeowner, this mower delivers top-notch performance with every use.