Poulan 424704, PR5524ESLCT owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 10

OPERATION

TO THROW SNOW (See Fig. 13)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 13

USING THE CLEAN-OUT TOOL (See Fig. 14)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

TO MOVE FORWARD AND BACKWARD (See Fig. 15)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 15

FIG. 14

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Speed Control ROD See Figs Unfold Upper HandleInstall Discharge Chute / Chute Rotater Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Electric start button used for starting the engineTo USE Fuel SHUT-OFF Valve See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig Before Starting the Engine Before Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenBefore Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Service Notes Exploded KEY Part Description Auger Assembly RH Auger HousingAuger Assembly LH Scrapper BARPALIER, Tarière BouchonDeflector Seal Chute WeldmentDeflector Weldment StrapRotator Pivot Bracket LEVER/CABLE Rotator AssemblyRotator Head Pulley PivotLower Handle Panel Bracket LH Panel Bracket RHHandle Grip Pivot Support WeldmentKnob RED SpacerRetainer Handle KnobCarriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Headlight Bezel Wire HarnessConsole Panel Flood HeadlightItem 43 Exploded END Plate Speed Selector Assembly43 402689 Drive Plate Assembly Control ARMSprocket Axle ShaftRoll PIN 3/16 Clik PINKEY Part Description Engine LCT Model PLMHK18600781DE 423184X428 Engine Mount PlateTraction Belt Belt CoverImpeller Belt Repair Parts Snow Thrower - Model Number PR5524ESLCT Wheels Wheel Assembly LHRetainer PIN Power CordSafety Ignition KEY WrenchDECAL, DANGER, Deflector DECAL, DangerDecal DECAL, InstructionService Notes Service Notes Limited Warranty

PR5524ESLCT, 424704 specifications

The Poulan PR5524ESLCT is a robust and efficient gas-powered lawn mower designed to make yard work a breeze. Featuring a powerful 140cc engine, this machine provides effective cutting performance for a variety of grass types and conditions. Its ability to tackle tough lawns with ease makes it a favorite among homeowners and landscaping professionals alike.

One of the standout features of the PR5524ESLCT is its 22-inch cutting deck. This ample cutting size allows for wider paths, reducing the time spent mowing and ensuring a cleaner cut. The deck is constructed from durable materials that can withstand harsh conditions, providing long-lasting reliability. Additionally, its cutting height adjustment is easily operated with a single lever, allowing users to customize their mowing experience with six different height settings.

Equipped with the Easy Start technology, the Poulan PR5524ESLCT is designed for effortless ignition. This feature significantly reduces the hassle of traditional starting methods, enabling users to get right to work without wasted time. The mower's engine is engineered for optimal fuel efficiency, which translates to longer run times between refueling.

Another remarkable feature of this model is its rear bagging and mulching capabilities. The mower comes with a rear bag that collects grass clippings for easy disposal, helping to maintain your lawn's pristine appearance. For those who prefer to return nutrients to the soil, the mulching function finely chops grass clippings, promoting a healthier lawn.

The PR5524ESLCT also boasts a rugged design that emphasizes user comfort. Its lightweight construction allows for easy maneuverability, while the ergonomically designed handles reduce user fatigue during longer mowing sessions. The folding handle feature facilitates compact storage, saving space in your garage or shed.

Safety is a top priority, and this mower is equipped with a safety guard that helps prevent accidental starting. It also includes a reliable braking system for added peace of mind. With its combination of power, efficiency, and user-friendly features, the Poulan PR5524ESLCT is an excellent choice for anyone looking to maintain a beautiful lawn effortlessly. Whether you’re a seasoned lawn care professional or a homeowner, this mower delivers top-notch performance with every use.
Top Page Image Contents