MTD 615, E665E, E645E manual Important Safe Operation Practices, Training, Preparation

Page 2

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR SNOW THROWER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. WHEN YOU SEE THIS SYMBOL- HEED ITS WARNING.

WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

DANGER: Your snow thrower was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. If you violate any of these rules, you may cause serious injury to yourself or others.

1. TRAINING

•Read this operator's manual carefully in its entirety before attempting to assemble or operate this machine. Be completely familiar with the controls and the proper use of this machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

•Never allow children under 14 years old to operate a snow thrower. Children 14 years old and over should only operate snow thrower under close parental supervision. Only persons well acquainted with these rules of safe operation should be allowed to use your snow thrower.

•No one should operate this unit while intoxicated or while taking medication that impairs the senses or reactions.

•Keep the area of operation clear of all persons, especially small children and pets.

•Exercise caution to avoid slipping or falling, especially when operating in reverse.

2.PREPARATION

•Thoroughly inspect the area where the equipment is to be used and remove all door mats, sleds, boards, wires and other foreign objects.

•Disengage all clutches and shift into neutral before starting engine.

•Do not operate equipment without wearing adequate winter outer garments. Do not wear jewelry, long scarfs or other loose clothing which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

•Before working with gasoline, extinguish all cigarettes and other sources of ignition. Check the fuel before starting the engine. Gasoline is an extremely flammable fuel. Do not fill the gasoline tank indoors, while the engine is running, or until engine has been allowed to cool at least two minutes. Replace gasoline cap securely and wipe off any spilled gasoline before starting the engine as it may cause a fire or explosion.

•Use a grounded three wire plug-in for all units with electric drive motors or electric starting motors.

•Adjust collector housing height to clear gravel or crushed rock surface.

•Never attempt to make any adjustments while engine is running (except where specifically recommended by manufacturer).

•Let engine and machine adjust to outdoor temperature before starting to clear snow.

•Always wear safety glasses or eye shields during operation or while performing an adjustment or repair, to protect eyes from foreign objects that may be thrown from the machine in any direction.

3.OPERATION

•Do not put hands or feet near or under rotating parts. Keep clear of discharge opening and auger at all times.

•Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

•After striking a foreign object, stop the engine, remove wire from spark plug, and thoroughly inspect the snow thrower for any damage. Repair the damage before restarting and operating the snow thrower.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Important Read Safety Rules and Instructions Carefully MTD Products INC. P.O. BOX 368022 CLEVELAND, OhioPreparation Important Safe Operation PracticesTraining OperationMaintenance and Storage Finding Your Model Number Calling Customer SupportContents of Hardware Pack Unpacking Assembly InstructionsTools Required for Assembly Loose Parts in Carton See FigureAssembling the Handles and Handle Panel Hardware B Attaching Speed Selector Plate and Shift Lever Hardware CAttaching the Chute Crank Hardware F Attaching the Chute Assembly Hardware EAttaching the Clutch Cables Hardware D Auger Drive Clutch Final Assembly and AdjustmentsTraction Drive Clutch and Shift Lever Adjustment Controls Operation To Stop Engine Electric StarterRecoil Starter Adjustments Lubrication Maintenance Drive Belt Changing the Friction Wheel RubberOFF-SEASON Storage Trouble Shooting Guide Trouble Possible Causes Corrective ActionIllustrated Parts Gear Assembly DescriptionHandle Assembly † Models E645 and E665 Only Blower Housing Description Frame Assembly Wheel Assemblies Engine and V Belts † Models 645 and 665 only MANUFACTURER’S Limited Warranty for

615, E645E, E665E specifications

The MTD E665E, E645E, and E615 are part of a dynamic lineup of electric lawn mowers that cater to various gardening needs, providing efficiency and sustainability in lawn maintenance. These models by MTD reflect advancements in technology while emphasizing user-friendliness and environmental responsibility.

The E665E is the flagship model, featuring a powerful electric motor capable of delivering exceptional cutting performance. One of its most notable features is its self-propulsion system, which allows users to manage large lawns with ease. The mower is equipped with a dual-blade cutting system, ensuring a precise and even cut while significantly reducing the need for frequent blade maintenance. Users also appreciate its large cutting deck, which allows for broader swathes with each pass, minimizing mowing time and increasing efficiency.

Moving on to the E645E, this model strikes a balance between functionality and compact design. It retains many of the high-performance features found in the E665E but is tailored for medium-sized lawns. The innovative brushless motor technology in the E645E ensures a quieter operation while extending the life of the mower. This model also features adjustable cutting heights that can be easily modified with a single lever, providing versatility to navigate different grass types and lengths.

Lastly, the MTD E615 is designed for more intimate spaces or smaller yards. Despite its size, it does not compromise on performance. The E615 utilizes an efficient battery system that provides extended runtime, catering to homeowners who require mobility and maneuverability. One of its standout features is the lightweight design, making it easy to transport and store. Additionally, the E615 is equipped with a mulching capability, allowing users to return clippings to the lawn, promoting healthier grass while reducing waste.

All three models are designed with user comfort in mind, including ergonomic handles and easy-to-use controls. Their environmentally friendly electric operation eliminates fuel consumption and emissions, making them ideal choices for eco-conscious consumers. Furthermore, these mowers provide a quiet alternative to traditional gas-powered machines, appealing to suburban homeowners who value peace in their neighborhoods.

In summary, the MTD E665E, E645E, and E615 combine innovative technology, robust performance, and user-friendly features to provide effective lawn care solutions for various yard sizes. With their focus on sustainability and efficiency, these electric mowers are paving the way for the future of lawn maintenance.
Top Page Image Contents