MTD E665E, E645E, 615 manual Maintenance and Storage

Page 3

•If the snow thrower should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble.

•Stop engine whenever you leave the operating position, before unclogging the collector/impeller housing or discharge guide, and making any repairs, adjustments, or inspections. Never place your hand in the discharge or collector openings. Use a stick or wooden broom handle to unclog the discharge opening.

•Take all possible precautions when leaving the unit unattended. Disengage the collector/impeller, shift into neutral, stop the engine, and remove the key.

•When cleaning, repairing, or inspecting, make certain collector/impeller and all moving parts have stopped. Disconnect spark plug wire and keep away from plug to prevent accidental starting.

•Do not run engine indoors, except when starting engine and transporting snow thrower in or out of building. Open doors. Exhaust fumes are dangerous.

•Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.

•Never operate snow thrower without guards, plates, or other safety protection devices in place.

•Never operate snow thrower near glass enclosure, automobiles, window wells, drop off, etc., without proper adjustments of snow thrower discharge angle. Keep children and pets away.

•Do not overload machine capacity by attempting to clear snow at too fast a rate.

•Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing.

•Never direct discharge at bystanders or allow anyone in front of unit.

•Disengage power to collector/impeller when transporting or not in use.

•Use only attachments and accessories approved by the manufacturer of snow thrower (such as wheel weights, counter weights, cabs, etc.).

•Never operate the snow thrower without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk, never run.

•Muffler and engine become hot and can cause a burn. Do not touch.

4.MAINTENANCE AND STORAGE

•Check shear bolts, engine mounting bolts, etc., at frequent intervals for proper tightness to be sure equipment is in safe working condition.

•Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow engine to cool before storing in any enclosure.

•Always refer to operator's manual instructions for important details if snow thrower is to be stored for an extended period.

•Run machine a few minutes after throwing snow to prevent freeze up of collector/impeller.

•Check clutch controls periodically to verify they engage and disengage properly and readjust if necessary. Refer to operator's manual for adjustment instructions.

WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

DANGER

AVOID INJURY FROM ROTATING AUGER - KEEP HANDS, FEET ANDCLOTHINGAWAY.

WARNING

1.STOP ENGINE BEFORE REMOVING DEBRIS AND SERVICING UNIT

2.KEEP CLEAR OF IMPELLER WHILE ENGINE IS RUNNING

3.NEVER DIRECT DISCHARGE AT BYSTANDERS OR WINDOWS OR

ALLOW ANYONE IN FRONT OF

UNIT

4.THOROUGHLY INSPECT THE AREA WHERE THE EQUIPMENT IS TO BE USED AND REMOVE ALL DOOR MATS, SLEDS, BOARDS, WIRES AND OTHER FOREIGN OBJECTS

5.REFER TO OWNERS MANUAL FOR FULL INSTRUCTIONS

3396MW

Safety Labels Found on Snow Thrower

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents MTD Products INC. P.O. BOX 368022 CLEVELAND, Ohio Important Read Safety Rules and Instructions CarefullyOperation Important Safe Operation PracticesTraining PreparationMaintenance and Storage Calling Customer Support Finding Your Model NumberContents of Hardware Pack Loose Parts in Carton See Figure Assembly InstructionsTools Required for Assembly UnpackingAttaching Speed Selector Plate and Shift Lever Hardware C Assembling the Handles and Handle Panel Hardware BAttaching the Chute Assembly Hardware E Attaching the Clutch Cables Hardware DAttaching the Chute Crank Hardware F Final Assembly and Adjustments Traction Drive Clutch and Shift Lever AdjustmentAuger Drive Clutch Controls Operation Electric Starter Recoil StarterTo Stop Engine Adjustments Lubrication Maintenance Changing the Friction Wheel Rubber Drive BeltOFF-SEASON Storage Trouble Possible Causes Corrective Action Trouble Shooting GuideDescription Illustrated Parts Gear AssemblyHandle Assembly † Models E645 and E665 Only Blower Housing Description Frame Assembly Wheel Assemblies Engine and V Belts † Models 645 and 665 only MANUFACTURER’S Limited Warranty for

615, E645E, E665E specifications

The MTD E665E, E645E, and E615 are part of a dynamic lineup of electric lawn mowers that cater to various gardening needs, providing efficiency and sustainability in lawn maintenance. These models by MTD reflect advancements in technology while emphasizing user-friendliness and environmental responsibility.

The E665E is the flagship model, featuring a powerful electric motor capable of delivering exceptional cutting performance. One of its most notable features is its self-propulsion system, which allows users to manage large lawns with ease. The mower is equipped with a dual-blade cutting system, ensuring a precise and even cut while significantly reducing the need for frequent blade maintenance. Users also appreciate its large cutting deck, which allows for broader swathes with each pass, minimizing mowing time and increasing efficiency.

Moving on to the E645E, this model strikes a balance between functionality and compact design. It retains many of the high-performance features found in the E665E but is tailored for medium-sized lawns. The innovative brushless motor technology in the E645E ensures a quieter operation while extending the life of the mower. This model also features adjustable cutting heights that can be easily modified with a single lever, providing versatility to navigate different grass types and lengths.

Lastly, the MTD E615 is designed for more intimate spaces or smaller yards. Despite its size, it does not compromise on performance. The E615 utilizes an efficient battery system that provides extended runtime, catering to homeowners who require mobility and maneuverability. One of its standout features is the lightweight design, making it easy to transport and store. Additionally, the E615 is equipped with a mulching capability, allowing users to return clippings to the lawn, promoting healthier grass while reducing waste.

All three models are designed with user comfort in mind, including ergonomic handles and easy-to-use controls. Their environmentally friendly electric operation eliminates fuel consumption and emissions, making them ideal choices for eco-conscious consumers. Furthermore, these mowers provide a quiet alternative to traditional gas-powered machines, appealing to suburban homeowners who value peace in their neighborhoods.

In summary, the MTD E665E, E645E, and E615 combine innovative technology, robust performance, and user-friendly features to provide effective lawn care solutions for various yard sizes. With their focus on sustainability and efficiency, these electric mowers are paving the way for the future of lawn maintenance.
Top Page Image Contents