Poulan 96192000600, 199329 owner manual HOW to USE Your Snow Thrower, Stopping

Page 10

OPERATION

The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear

safety glasses or eye shields while operating 00155 your snow thrower or performing any adjust- ments or repairs. We recommend standard safety glasses

or a wide vision safety mask worn over spectacles.

TO USE CHOKE CONTROL (See Fig. 13)

The choke control is located on the engine. Use the choke control whenever you are starting a cold engine. Do not use to start a warm engine.

•To engage choke, turn knob clockwise. Slowly turn knob counterclockwise to disengage.

HOW TO USE YOUR SNOW THROWER

Know how to operate all controls before adding fuel or attempting to start the engine.

STOPPING

TRACTION DRIVE

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

AUGER

•Release the auger control lever to stop throwing snow.

ENGINE

1.Move throttle control to “STOP” position.

2.Remove (do not turn) safety ignition key to prevent unauthorized use.

NOTE: Never use choke to stop engine.

TO USE FUEL SHUT-OFF VALVE (See Fig. 11)

The fuel shut-off valve is located beneath the fuel tank on the engine. Always operate the snow thrower with the fuel shut-off valve in the OPEN position.

OFF

OPEN

FIG. 11

TO USE THROTTLE CONTROL (See Fig. 12)

The throttle control is located on the engine. Always operate the snow thrower with the engine at full throttle. Full throttle offers the best snow thrower performance.

FAST

SLOW

FIG. 12

OFFFULL

FIG. 13

TO CONTROL SNOW DISCHARGE (See Fig. 14)

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

If the discharge chute or auger become clogged, shut-off engine and wait for all moving parts to stop. Use the clean-out tool, NOT YOUR HANDS, to unclog the chute and/or auger.

The DIRECTION in which snow is to be thrown is controlled by the discharge chute control lever.

•To change the discharge chute position, press down- ward on discharge chute control lever and move lever left or right until chute is in desired position. Be sure lever springs back and locks into desired position.

DISCHARGE CHUTE

CONTROL LEVER

CHUTE DEFLECTOR

REMOTE CONTROL LEVER

FIG. 14

The DISTANCE that snow is thrown is controlled by the position of the chute deflector. Set the deflector low to throw snow a short distance; set the deflector higher to throw snow farther.

•Press downward on chute deflector control lever and move lever forward to lower the deflector and decrease the distance. Move lever back to raise the deflector and increase the distance. Be sure lever springs back

10

and locks into desired position.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Tool BOX See FigInstall Traction Drive Control ROD See Figs Install Speed Control ROD See FigsInstall Auger Control ROD See Figs Install Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Deflector remote control lever used to changeHOW to USE Your Snow Thrower StoppingTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Move Forward and Backward See FigScraper BAR Before Starting the EngineTo Start Engine Before Stopping Snow Throwing TipsIf Recoil Starter has Frozen Maintenance Cleaning EngineTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector To Remove Wheels See Fig Remove the klik pin and remove wheel from axleStorage OtherTroubleshooting Limited Warranty

199329, 96192000600 specifications

The Poulan model 199329,96192000600 is a powerful and versatile tool designed for various outdoor maintenance tasks. This particular model is often recognized for its efficiency and user-friendly features, making it a go-to choice for homeowners, landscapers, and gardening enthusiasts.

One of the standout features of the Poulan 199329,96192000600 is its robust engine. Equipped with a reliable, high-performance motor, this tool ensures ample power to tackle demanding jobs such as trimming, cutting, and pruning. The engine is designed to operate smoothly, providing consistent power output while maintaining fuel efficiency, which is a critical consideration for users looking to minimize operational costs over time.

Another distinguishing characteristic of this model is its lightweight design. Weighing in at an easily manageable figure, the Poulan 199329,96192000600 allows for prolonged use without excessive fatigue. This aspect is particularly beneficial for users engaging in extensive lawn care or landscaping activities, as it helps enhance maneuverability and ease of use.

In terms of ergonomic features, the handle design is crafted to provide maximum comfort. The soft-grip handle minimizes vibrations, ensuring that users have a comfortable grip while working, further reducing fatigue during long sessions. This user-centric approach extends to the overall design of the tool, which allows for easy accessibility to controls and features, making it suitable for both novice and experienced users alike.

Technology plays a vital role in the performance of the Poulan 199329,96192000600. It incorporates advanced safety features, such as an emergency stop mechanism and safety shields, to protect users during operation. These features instill confidence, particularly for those who may be less familiar with power tools.

Additionally, this model often comes equipped with easy-start technology, which facilitates effortless ignition. This is a significant advantage for users who may struggle with traditional starting mechanisms. The ease of starting ensures that users can get to work without unnecessary delays.

Maintenance is also simplified with the Poulan 199329,96192000600. The tool is designed for easy access to the parts requiring regular upkeep, ensuring that users can keep their equipment in top shape with minimal hassle.

Overall, the Poulan 199329,96192000600 stands out as a reliable, efficient, and user-friendly equipment, making it an excellent choice for anyone in need of a quality outdoor tool to handle various yard tasks.
Top Page Image Contents