Poulan 407885, 96192001200 owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 11

OPERATION

TO THROW SNOW (See Fig. 15)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 15

USING THE CLEAN-OUT TOOL (See Fig. 16)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the auger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to pre- vent accidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting the engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING CLIP

FIG. 16

TO MOVE FORWARD AND BACKWARD (See Fig. 17)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 17

POWER STEERING OPERATION (See Fig. 18)

Steeringtriggersareusedtoassistinsteeringyoursnowthrow- er. The triggers are located on the underside of each handle. When a trigger is squeezed, it disengages the drive wheel on that side of snow thrower and allows it to turn in that direction.

•To turn left – squeeze left side trigger.

•To turn right – squeeze right side trigger.

LH TURN

RH TURN

TRIGGER

TRIGGER

11

FIG. 18

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotater Head See FigKnow Your Snow Thrower OperationRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Throw Snow See FigTo Start Engine Before Starting the EngineScraper BAR If Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Maintenance Engine CleaningChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Remove the klik pin and remove wheel from axle To Remove Wheels See FigOther StorageTroubleshooting 5518 KEY Part Description 205 183334 Knob, Lever Repair Parts Snow Thrower Model PP10530ES Handles Repair Parts Snow Thrower Model PP10530ES Handles Repair Parts Snow Thrower Model PP10530ES Drive Repair Parts Snow Thrower Model PP10530ES Drive Page KEY Part Description Repair Parts Repair Parts Limited Warranty

407885, 96192001200 specifications

The Poulan 96192001200,407885 is a high-performance gas-powered chainsaw designed to meet the needs of both casual users and professionals. This versatile tool is engineered with advanced technologies and features that enhance its efficiency, usability, and durability, making it a preferred choice for various cutting tasks.

One of the standout characteristics of the Poulan 96192001200,407885 is its powerful engine. The chainsaw is equipped with a robust 40cc 2-cycle engine, which provides ample power for heavy-duty cutting and trimming tasks. This engine delivers a reliable and consistent cutting performance, allowing users to tackle thicker branches and larger logs with ease.

The chainsaw incorporates an easy-start system, which significantly reduces the effort required to start the engine. This technology is particularly beneficial for users who may struggle with traditional starting mechanisms, allowing for a hassle-free experience right from the beginning.

Another notable feature of the Poulan chainsaw is its lightweight design. Weighing in at just around 10 pounds, this chainsaw is easy to maneuver, making it suitable for extended use without causing excessive fatigue. This ergonomic design is complemented by a comfortable handle that promotes a secure grip, further enhancing user control and comfort during operation.

In terms of safety, the Poulan 96192001200,407885 is equipped with a chain brake that engages automatically in the event of kickback. This critical safety feature helps prevent accidents, ensuring that users can work confidently while minimizing risk. Additionally, the chainsaw has an adjustable chain oiling system, which allows users to manage oil flow based on their cutting needs, ensuring the chain operates smoothly and reduces wear.

The chainsaw also features a 16-inch cutting bar, providing a balance between cutting capacity and maneuverability. This size is ideal for a variety of tasks, including cutting firewood, felling small trees, and pruning large branches.

Overall, the Poulan 96192001200,407885 is a reliable and efficient chainsaw that combines power, safety, and user-friendly features, making it an essential tool for homeowners and professionals alike. Whether for yard maintenance or more demanding forestry tasks, this chainsaw promises to deliver exceptional performance every time it is put to use.
Top Page Image Contents