Poulan 437953 owner manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Page 16

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or adjustments:

1.Be sure the on/off switch is in the OFF position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 21)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shear bolt and hex nut. Should a foreign ob- ject or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared. To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 21

TO REMOVE BELT COVER (See Fig. 22)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

•Replace belt cover by installing cover and screws and tighten securely.

FRAME

BELT COVER

SCREWS

16

FIG. 22

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Operation Know Your Snow ThrowerPrimer Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting engineHOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig Power Steering Operation See FigTo Adjust Skid Plates See Fig To Move Forward and Backward See FigBefore Starting the Engine Scraper BAR See FigTo USE Drift Cutters See Fig Check Engine OIL Level See FigSnow Throwing Tips To Start EngineBefore Stopping If Recoil Starter has FrozenMaintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector Shear Bolts See FigTo Replace Belts See Fig To Adjust Cable Tension See Fig To Remove Wheels See FigCarburetor Engine SpeedStorage OtherFuel System Engine OILTroubleshooting Service Notes Exploded KEY Part Description Auger Housing Scrapper BARCARRIAGEBOLT5/16−18X.625 Auger BearingAuger Assembly 30 LH Auger Assembly 30 RHSkid Plate LH Skid Plate RHWeight BAR Drift Cutter BARCARRIAGEBOLT5/16−18X.750 Plastic WasherDeflector Control Assembly Chute WeldmentDeflector Weldment Deflector SealLEVER/CABLE Rotator Assembly Cable Assembly AdjustableCable Assembly Heat Shield Rotator HeadRepair Parts Snow Thrower Model PP414EPS30 Handles Loop Handle LH Loop Handle RHLower Handle Pivot Support WeldmentSpacer Knob REDHandle Knob Washer 3/8Carriage Bolt 5/16-18 X 155377 NUT 5/16-18 169675 Axle Shaft Repair Parts Snow Thrower Model PP414EPS30 DriveSprocket Exploded Assembly Drive Plate AssemblySpeed Selector Rubber RingComplete LCT Engine Frame427963X428 Engine Mounting PlateImpeller Belt Traction BeltIdler ARM Bracket Idler PulleyRepair Parts Snow Thrower Model PP414EPS30 Wheels Cable Bracket LH Wheel Assembly LHCable Bracket RH Safety Ignition KEY Repair Parts Snow Thrower Model PP414EPS30 BAG of Parts422663 Repair Parts Snow Thrower Model PP414EPS30 Decals Service Notes Service Notes Limited Warranty

437953, 96198003102 specifications

The Poulan 96198003102,437953 is a remarkable piece of outdoor equipment designed to make lawn care tasks effortless and efficient. This powerful tool has become a favorite among homeowners and professionals alike, thanks to its robust features and innovative technologies.

At the heart of the Poulan 96198003102,437953 is a high-performance engine that provides reliable power for a variety of cutting and trimming tasks. This engine is designed for durability and longevity, ensuring that the equipment can withstand the rigors of regular use. Its gas-powered design means you won’t be tethered to a power outlet, allowing for greater mobility and convenience while tackling larger areas.

One of the standout features of this equipment is its advanced cutting system. The Poulan 96198003102,437953 comes equipped with a precision blade that delivers clean and efficient cuts. The sharp, durable design allows for cutting through tougher grass and weeds with ease, ensuring a neat and tidy lawn. Additionally, the adjustable height settings enable users to customize the cutting height, making it suitable for various types of grass and terrain.

Comfort and usability have also been prioritized in this model. The ergonomic handle provides a comfortable grip, reducing strain on the user’s hands and wrists during extended use. The lightweight design contributes to ease of maneuverability, allowing users to navigate through tight spaces without difficulty. Furthermore, the tool features an easy start mechanism which simplifies the startup process, making it accessible for users of all skill levels.

For those concerned about environmental impact, the Poulan 96198003102,437953 incorporates technologies that promote fuel efficiency and reduced emissions. This is particularly important in today’s eco-conscious market, where consumers are looking for tools that align with their values while still delivering performance.

In addition to its powerful engine and sharp cutting system, the Poulan 96198003102,437953 offers minimal maintenance requirements. This is a significant advantage for users, as it means less time spent on upkeep and more time enjoying a well-manicured lawn.

Overall, the Poulan 96198003102,437953 stands out in its category for its combination of power, efficiency, and user-friendly design. Whether you're maintaining your backyard or tackling larger landscaping projects, this versatile tool is equipped to get the job done effectively and effortlessly. Its blend of innovative technologies and user-focused features makes it a top choice for outdoor enthusiasts looking for reliability and performance.
Top Page Image Contents