Poulan 96192003501, 429884 Using the CLEAN-OUT Tool See Fig, To Move Forward and Backward See Fig

Page 11

OPERATION

USING THE CLEAN-OUT TOOL (See Fig. 14)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting the engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

FIG. 14

TO MOVE FORWARD AND BACKWARD (See Fig. 15)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 15

POWER STEERING OPERATION (See Fig. 16)

Steering triggers are used to assist in steering your snow thrower. The triggers are located on the underside of each handle. When a trigger is squeezed, it disen- gages the drive wheel on that side of snow thrower and allows it to turn in that direction.

•To turn left – squeeze left side trigger.

•To turn right – squeeze right side trigger.

LH TURN

RH TURN

TRIGGER

TRIGGER

FIG. 16

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonUnfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Install Chute Deflector Remote Control See FigsIgnition KEY OperationKnow Your Snow Thrower PrimerRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsTo Control Snow Discharge See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig Check Engine OIL Level See Fig To Adjust Skid Plates See FigBefore Starting the Engine Scraper BAR See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingMaintenance Engine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Engine Speed To Adjust Cable Tension See FigTo Remove Wheels See Fig CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Service Notes 23 22 KEY Part Description Scrapper BAR Auger HousingAuger Assembly 30 LH Auger Assembly 30 RHBearing Plug Auger BearingDeflector Spring Knob BlackPOP Rivet Shoulder ScrewRotator Pivot Bracket LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator HeadLower Tube Repair Parts Snow Thrower Model XT11530ES HandlesLoop Handle LH Loop Handle RHRetainer 180480Impeller ROD Traction RODWasher 3/8 SpacerKnob RED Handle KnobTorsion Spring Wire HarnessInterlock Spring Interlock CAMRepair Parts Snow Thrower Model XT11530ES Drive Rubber Ring AssemblyDrive Plate Assembly Speed SelectorSprocket Axle ShaftEngine Mounting Plate Engine ModelFrame 423185X505428684 Repair Parts Snow Thrower Model XT11530ES Wheels 01.06.005-A 193071 Repair Parts Snow Thrower Model XT11530ES BAG of PartsSafety Ignition KEY DECAL, DANGER, Deflector Repair Parts Snow Thrower Model XT11530ES Decals181037 DECAL, DangerService Notes Service Notes Service Notes Limited Warranty

429884, 96192003501 specifications

The Poulan 96192003501,429884 is a powerful and versatile tool designed for outdoor maintenance, particularly for those who require a robust chainsaw for various tasks. This model is engineered with performance and efficiency in mind, making it an ideal choice for both professional landscapers and homeowners looking to tackle yard work with ease.

One of the standout features of the Poulan 96192003501,429884 is its advanced engine technology. The chainsaw is equipped with a reliable two-stroke engine that provides plenty of power for cutting through wood with minimal effort. This means users can expect quick and efficient performance, whether they are felling trees, trimming branches, or cutting firewood.

Safety is a top priority in the design of this chainsaw. It features an automatic chain oiler, ensuring the chain remains well-lubricated during operation, which not only prolongs the life of the chain but also reduces friction and heat buildup. Additionally, the Poulan chainsaw incorporates a low kickback chain, designed to minimize the risk of kickback during cutting, making it safer for users, especially beginners.

The Poulan 96192003501,429884 is also designed for user comfort. It features an ergonomic handle that offers a comfortable grip, reducing fatigue during extended use. The chainsaw's lightweight design enhances portability, allowing users to maneuver it easily in various environments, from dense woods to open fields.

Another notable characteristic is its easy-start technology. With this feature, starting the chainsaw is straightforward, requiring less effort to get the engine running smoothly. This convenience is particularly beneficial for those who may struggle with traditional starting mechanisms.

In summary, the Poulan 96192003501,429884 is a highly functional chainsaw that combines power, safety, and user-friendly features. Its advanced engine technology, automatic chain oiler, low kickback chain, ergonomic design, and easy-start capabilities make it an excellent choice for those looking to maintain their outdoor spaces efficiently and safely. Whether for professional landscaping or home improvement projects, this chainsaw stands out as a reliable tool for tackling a variety of cutting tasks.
Top Page Image Contents