Poulan 421028 owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 10

OPERATION

TO THROW SNOW (See Fig. 15)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 15

USING THE CLEAN-OUT TOOL (See Fig. 15)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING CLIP

FIG. 15

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting the engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

TO MOVE FORWARD AND BACKWARD (See Fig. 16)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 16

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Parts Packed Separately in Carton Assembly / PRE-OPERATIONRemove Snow Thrower from Carton Install Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig Before Starting the Engine To Start EngineBefore Stopping Snow Throwing TipsIf Recoil Starter has Frozen Maintenance Cleaning EngineTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Frame Auger Assembly Housing Handles Engine Speed StorageCarburetor Fuel SystemOther CylinderTroubleshooting Scraper BAR Auger HousingKEY Part Description Auger BearingSkid Plate LH Auger 27 LHAuger 27 RH Skid Plate RHExploded Bearing Gearbox Assembly178675X008 Corner Bracket Clean OUT Tool Impeller PulleyDeflector Seal Chute WeldmentDeflector Weldment StrapRotator Head LEVER/CABLE Rotator AssemblyCable Assembly Rotator Pivot BracketRepair Parts Snow Thrower - Model NO. PR8527ES Handles Loop Handle LH Loop Handle RHControl Lever RH Control PanelControl Lever LH Traction ROD ARMCarriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Repair Parts Snow Thrower - Model NO. PR8527ES Drive Control ARM 43 420900 Drive Plate AssemblyEND Plate Clevis PINSprocket Axle ShaftRoll PIN 3/16 Clik PINFrame ENGINE, TECEngine Mount Plate Traction Belt Belt CoverImpeller Belt Repair Parts Snow Thrower - Model NO. PR8527ES Wheels Wheel Assembly LHSafety Ignition KEY Repair Parts Snow Thrower - Model NO. PR8527ES BAG of Parts35062 DECAL, Danger Repair Parts Snow Thrower - Model NO. PR8527ES Decals181037 DECAL, DANGER, DeflectorService Notes Service Notes Limited Warranty

421028 specifications

The Poulan 421028 is a notable chainsaw that has gained attention among both casual users and professionals due to its blend of power, efficiency, and user-friendly design. This model is especially suited for light to medium-duty tasks, making it an ideal choice for homeowners and those looking to tackle yard work or firewood preparation.

One of the standout features of the Poulan 421028 is its powerful engine. It typically comes with a 42cc two-stroke engine that delivers a robust performance, allowing users to cut through various types of wood with ease. The power output ensures that even demanding tasks can be completed efficiently, making it suitable for felling small trees, trimming branches, and cutting logs.

In addition to power, the Poulan 421028 is designed with user comfort in mind. It features an ergonomic design that reduces operator fatigue, allowing for extended use without discomfort. The lightweight construction of the chainsaw contributes to its ease of maneuverability, making it accessible for users of different skill levels.

The chainsaw is equipped with an adjustable automatic oiling system that ensures optimal lubrication of the bar and chain during operation. This technology not only enhances the lifespan of the components but also ensures that the chainsaw runs smoothly, reducing the risk of overheating and wear.

Safety is another critical aspect of the Poulan 421028. It includes reliable safety features such as a chain brake, which immediately stops the chain's rotation in the event of kickback, protecting the user from potential injuries. Additionally, the front guard serves to shield hands from debris and other hazards, ensuring a safer cutting environment.

Ease of maintenance is a key consideration for any user, and the Poulan 421028 shines in this aspect as well. It comes with a tool-less access feature for the air filter and spark plug, simplifying routine maintenance tasks. This convenience helps users keep the chainsaw in peak operating condition with minimal effort.

In conclusion, the Poulan 421028 is a versatile and reliable chainsaw that combines power, comfort, and safety features, making it an excellent choice for various cutting tasks. Its user-friendly design, impressive engine performance, and ease of maintenance make it a valuable tool for both novice and experienced users alike. Whether you're tackling yard work or preparing firewood, the Poulan 421028 provides the efficiency and reliability needed to get the job done effectively.
Top Page Image Contents