Poulan 421028 owner manual Unfold Upper Handle, Install Speed Control ROD See Figs

Page 5

ASSEMBLY / PRE-OPERATION

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

CONTROL

ROD

PLASTIC TIE

UPPER

HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

SPEED CONTROL ROD

 

RETAINER

 

SPRING

SPEED

SPEED

CONTROL

CONTROL

BRACKET

LEVER

FIG. 2

INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4)

The traction drive control rod has the long loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.

2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod into hole in drive control bracket. Secure with retainer spring.

TRACTION DRIVE

CONTROL ROD

RUBBER

SLEEVE

LOOP OPEN-

ING DOWN

PIVOT

BRACKET

FIG. 3

TRACTION DRIVE

RETAINER

CONTROL LEVER

SPRING

 

TRACTION

 

DRIVE

 

CONTROL

 

ROD

DRIVE

 

CONTROL

 

BRACKET

 

FIG. 4

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Know Your Snow Thrower OperationPrimer Ignition KEYRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig To Start Engine Before Starting the EngineIf Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Maintenance Engine CleaningChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Frame Auger Assembly Housing Handles Carburetor StorageEngine Speed Fuel SystemCylinder OtherTroubleshooting KEY Part Description Auger HousingScraper BAR Auger BearingAuger 27 RH Auger 27 LHSkid Plate LH Skid Plate RHExploded 178675X008 Corner Bracket Clean OUT Tool Gearbox AssemblyBearing Impeller PulleyDeflector Weldment Chute WeldmentDeflector Seal StrapCable Assembly LEVER/CABLE Rotator AssemblyRotator Head Rotator Pivot BracketRepair Parts Snow Thrower - Model NO. PR8527ES Handles Loop Handle RH Loop Handle LHControl Lever LH Control PanelControl Lever RH Traction ROD ARMCarriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Repair Parts Snow Thrower - Model NO. PR8527ES Drive END Plate 43 420900 Drive Plate AssemblyControl ARM Clevis PINRoll PIN 3/16 Axle ShaftSprocket Clik PINEngine Mount Plate ENGINE, TECFrame Impeller Belt Belt CoverTraction Belt Wheel Assembly LH Repair Parts Snow Thrower - Model NO. PR8527ES Wheels35062 Repair Parts Snow Thrower - Model NO. PR8527ES BAG of PartsSafety Ignition KEY 181037 Repair Parts Snow Thrower - Model NO. PR8527ES DecalsDECAL, Danger DECAL, DANGER, DeflectorService Notes Service Notes Limited Warranty

421028 specifications

The Poulan 421028 is a notable chainsaw that has gained attention among both casual users and professionals due to its blend of power, efficiency, and user-friendly design. This model is especially suited for light to medium-duty tasks, making it an ideal choice for homeowners and those looking to tackle yard work or firewood preparation.

One of the standout features of the Poulan 421028 is its powerful engine. It typically comes with a 42cc two-stroke engine that delivers a robust performance, allowing users to cut through various types of wood with ease. The power output ensures that even demanding tasks can be completed efficiently, making it suitable for felling small trees, trimming branches, and cutting logs.

In addition to power, the Poulan 421028 is designed with user comfort in mind. It features an ergonomic design that reduces operator fatigue, allowing for extended use without discomfort. The lightweight construction of the chainsaw contributes to its ease of maneuverability, making it accessible for users of different skill levels.

The chainsaw is equipped with an adjustable automatic oiling system that ensures optimal lubrication of the bar and chain during operation. This technology not only enhances the lifespan of the components but also ensures that the chainsaw runs smoothly, reducing the risk of overheating and wear.

Safety is another critical aspect of the Poulan 421028. It includes reliable safety features such as a chain brake, which immediately stops the chain's rotation in the event of kickback, protecting the user from potential injuries. Additionally, the front guard serves to shield hands from debris and other hazards, ensuring a safer cutting environment.

Ease of maintenance is a key consideration for any user, and the Poulan 421028 shines in this aspect as well. It comes with a tool-less access feature for the air filter and spark plug, simplifying routine maintenance tasks. This convenience helps users keep the chainsaw in peak operating condition with minimal effort.

In conclusion, the Poulan 421028 is a versatile and reliable chainsaw that combines power, comfort, and safety features, making it an excellent choice for various cutting tasks. Its user-friendly design, impressive engine performance, and ease of maintenance make it a valuable tool for both novice and experienced users alike. Whether you're tackling yard work or preparing firewood, the Poulan 421028 provides the efficiency and reliability needed to get the job done effectively.
Top Page Image Contents