Poulan 416810 owner manual Maintenance

Page 13

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

Maintain proper air pressure in both tires (14–17 P.S.I. / 19-24.5 N-m).

Keeptiresfreeofgasolineandoil,whichcanharmrubber.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

LUBRICATION CHART

SAE 5W-30 Motor Oil

See “ENGINE” in Maintenance section

General

Purpose

Grease

Pivot points

Auger

 

grease fittings

Engine oil

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to

13 the snow thrower.

Image 13
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Parts Packed Separately in Carton Assembly / PRE-OPERATIONRemove Snow Thrower from Carton Install Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Know Your Snow Thrower OperationPrimer Ignition KEYRecoil auxiliary starter handle used for starting Meets A.N.S.I. Safety RequirementsDischarge chute control lever used to change the di Stopping HOW to USE Your Snow ThrowerTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig Scraper BAR Before Starting the EngineTo Start Engine Before Stopping Snow Throwing TipsIf Recoil Starter has Frozen Maintenance Engine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector To Remove Wheels See Fig Other StorageTroubleshooting Service Notes AIG plugr1 KEY Part Description 07Chute-knob2 414280 Knob, Lever Repair Parts Snow Thrower - Model NO. PR8527ES Handles Repair Parts Snow Thrower - Model NO. PR8527ES Handles Repair Parts Snow Thrower - Model NO. PR8527ES Drive Repair Parts Snow Thrower - Model NO. PR8527ES Drive Page 416717X004 KEY Part Description413429X479 Page 416810 416811 Limited Warranty

416810 specifications

The Poulan 416810 is a robust chainsaw designed for both professional and leisure use, making it a versatile tool for a range of applications. Known for its reliability and performance, this model is particularly favored among homeowners and landscapers for its power and ease of use.

One of the standout features of the Poulan 416810 is its powerful engine. The chainsaw is equipped with a 40cc two-stroke engine that delivers impressive cutting power while remaining relatively lightweight. This engine is designed not only to provide adequate horsepower but also to reduce fuel consumption, making it an economical choice. The advanced combustion system promotes cleaner burning, hence reducing emissions and making it more environmentally friendly.

The chainsaw boasts an innovative Easy Start Technology, which allows for effortless starting. This feature minimizes the wear and strain on the starter cord, making it particularly user-friendly for those who may not be experienced in handling chainsaws. Additionally, the automatic oiler ensures that the chain and bar receive the proper lubrication during use, enhancing performance and prolonging the lifespan of the tool.

Safety is also a critical aspect of the Poulan 416810. The tool is equipped with a chain brake that provides an added layer of protection by stopping the chain motion in the event of kickback. The anti-vibration feature helps reduce user fatigue during extended use, ensuring a comfortable grip and greater control.

The Poulan 416810 features an adjustable chain tensioning system, which allows users to adjust the chain quickly and easily without the need for any additional tools. This feature is essential for maintaining optimal performance and ensuring the safety of the operation.

In terms of design, the Poulan 416810 is built with ergonomics in mind. The lightweight design, combined with a well-balanced frame, makes it easy to maneuver, allowing users to work for extended periods without excessive strain. The comfortable handles offer a secure grip, improving handling during operation.

Overall, the Poulan 416810 is an efficient and reliable chainsaw that combines power, safety, and ease of use, making it an ideal choice for a variety of cutting tasks, whether it be trimming branches, felling trees, or performing general landscaping. Its combination of advanced technology and thoughtful design ensures that both novice and experienced users can handle a range of tasks effectively.