Poulan 416810 owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotator head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotator head over chute bracket. If neces- sary, rotate chute assembly toalign square and pin on un- derside of chute rotator head with holes in chute bracket.

3.With chute rotator head and chute bracket aligned, position chute rotator head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATOR

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATOR HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for startingDischarge chute control lever used to change the di HOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes AIG plugr1 KEY Part Description 07Chute-knob2 414280 Knob, Lever Repair Parts Snow Thrower - Model NO. PR8527ES Handles Repair Parts Snow Thrower - Model NO. PR8527ES Handles Repair Parts Snow Thrower - Model NO. PR8527ES Drive Repair Parts Snow Thrower - Model NO. PR8527ES Drive Page KEY Part Description 416717X004413429X479 Page 416810 416811 Limited Warranty

416810 specifications

The Poulan 416810 is a robust chainsaw designed for both professional and leisure use, making it a versatile tool for a range of applications. Known for its reliability and performance, this model is particularly favored among homeowners and landscapers for its power and ease of use.

One of the standout features of the Poulan 416810 is its powerful engine. The chainsaw is equipped with a 40cc two-stroke engine that delivers impressive cutting power while remaining relatively lightweight. This engine is designed not only to provide adequate horsepower but also to reduce fuel consumption, making it an economical choice. The advanced combustion system promotes cleaner burning, hence reducing emissions and making it more environmentally friendly.

The chainsaw boasts an innovative Easy Start Technology, which allows for effortless starting. This feature minimizes the wear and strain on the starter cord, making it particularly user-friendly for those who may not be experienced in handling chainsaws. Additionally, the automatic oiler ensures that the chain and bar receive the proper lubrication during use, enhancing performance and prolonging the lifespan of the tool.

Safety is also a critical aspect of the Poulan 416810. The tool is equipped with a chain brake that provides an added layer of protection by stopping the chain motion in the event of kickback. The anti-vibration feature helps reduce user fatigue during extended use, ensuring a comfortable grip and greater control.

The Poulan 416810 features an adjustable chain tensioning system, which allows users to adjust the chain quickly and easily without the need for any additional tools. This feature is essential for maintaining optimal performance and ensuring the safety of the operation.

In terms of design, the Poulan 416810 is built with ergonomics in mind. The lightweight design, combined with a well-balanced frame, makes it easy to maneuver, allowing users to work for extended periods without excessive strain. The comfortable handles offer a secure grip, improving handling during operation.

Overall, the Poulan 416810 is an efficient and reliable chainsaw that combines power, safety, and ease of use, making it an ideal choice for a variety of cutting tasks, whether it be trimming branches, felling trees, or performing general landscaping. Its combination of advanced technology and thoughtful design ensures that both novice and experienced users can handle a range of tasks effectively.
Top Page Image Contents