Poulan P14530ES owner manual To Throw Snow See Fig, Using the CLEAN-OUT Tool See Fig

Page 10

OPERATION

TO THROW SNOW (See Fig. 13)

The auger rotation is controlled by the auger control lever located on the right side handle.

•Squeeze auger control lever to handle to engage the auger and throw snow.

•Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

FIG. 13

USING THE CLEAN-OUT TOOL (See Fig. 14)

In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage.

When cleaning, repairing, or inspecting, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent ac- cidental starting.

•Release the auger control lever and shut off the engine.

•Remove the clean-out tool from it's mounting clip. Grasp the tool firmly by the handle and push and twist the tool into the discharge chute to dislodge the blockage.

After the packed snow has been dislodged, return the clean- out tool to it's mounting clip by pushing it into the clip.

•Make sure the discharge chute is pointed in a safe direc- tion (no vehicles, buildings, people, or other objects are in the direction of discharge) before restarting the engine.

•Restart the engine, then squeeze the auger control lever to the handle to clear snow from the auger hous- ing and the discharge chute.

DISCHARGE CHUTE

CLEAN-OUT

TOOL

MOUNTING

CLIP

TO MOVE FORWARD AND BACKWARD (See Fig. 15)

SELF-PROPELLING, forward and reverse movement of the snow thrower, is controlled by the traction drive control lever located on the left side handle.

•Squeeze traction drive control lever to handle to engage the drive system.

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

SPEED and DIRECTION are controlled by the drive speed control lever.

•Press downward on the speed control lever and move lever to desired position BEFORE engaging the trac- tion drive control lever. Be sure lever springs back and locks into desired position.

CAUTION: Do not move speed control lever when traction drive control lever is engaged. Damage to the snow thrower can result.

•Slower speeds are for heavier snow and faster speeds are for light snow and transporting the snow thrower. It is recommended that you use a slower speed until you are familiar with the operation of the snow thrower.

NOTE: When both traction drive and auger control levers are engaged, the traction drive control lever will lock the auger control lever in the engaged position. This will allow you to release your right hand from the handle and adjust the discharge chute direction without interrupting the snow throwing process.

TRACTION DRIVE

CONTROL LEVER

DRIVE SPEED

CONTROL LEVER

FIG. 15

TO ADJUST SKID PLATES (See Fig. 16)

NOTE: The wrench provided in your parts bag may be used to adjust the skid plates.

Skid plates are located on each side of the auger housing and adjust the clearance between the scraper bar and the ground surface. Adjust skid plates evenly to proper height for current surface conditions. For removal of snow in normal conditions, such as a paved driveway or sidewalk, place skid plates in the highest position (lowest scraper clearance) to give a 1/8" clearance between the scraper bar and the ground. Use a middle position if the surface to be cleared is uneven.

FIG. 14

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Electric start button used for starting the engineTo USE Fuel SHUT-OFF Valve See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Adjust Skid Plates See Fig To Move Forward and Backward See FigCheck Engine OIL Level See Fig Before Starting the EngineScraper BAR See Fig ADD Gasoline See FigBefore Stopping Snow Throwing TipsIf Recoil Starter has Frozen Maintenance Cleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig To Remove Wheels See Fig To Adjust Cable Tension See FigTo Adjust Traction Belt and Auger Belt Tension CarburetorFuel System StorageOther Engine OILTroubleshooting Exploded KEY Part Description Auger Assembly 30 RH Auger Assembly 30 LHCARRIAGEBOLT5/16−18X.625 532 43 59-51 Plate Skid Plastic Hdpe Flange BLKKnob Black 532 18 45-11 Deflector WeldmentStrap POP RivetCable Assembly Heat Shield 532 42 82-72 LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator Pivot BracketHandle Grip Repair Parts Snow Thrower Model P14530ES Handles532 44 36-17 Pivot Support Weldment Retainer Knob RED 584 80 90-01 Interlock Control RODSpacer Handle Knob01.10.001-B Interlock StopRepair Parts Snow Thrower Model P14530ES Drive Item 42 Exploded817 54 10-08 Thred Rolling Screw Speed Selector AssemblyShifter Link 532 40 26-89 Drive Plate Assembly Wheel HUBRepair Parts Frame 532 42 86-85 Cover Assembly580 42 61-01 LCT Complete Engine KEY Part Description 532 43 07-64 Engine Mounting PlateBelt Guide Idler Pulley 585 20 02-01 Pulley ENG Impeller585 02 93-01 Pulley ENG Traction Washer 5/16Repair Parts Snow Thrower Model P14530ES Wheels Wheel Assembly LHKEY Part Description 532 44 30-59 Safety Ignition KEY KIT Repair Parts Snow Thrower Model P14530ES BAG of PartsPower Cord WrenchRepair Parts Snow Thrower Model P14530ES Decals Service Notes Service Notes Limited Warranty

P14530ES specifications

The Poulan P14530ES is a highly efficient chainsaw designed for homeowners and light-duty professionals who need a reliable tool for various cutting tasks. Featuring a powerful 14-amp motor, this electric chainsaw offers an impressive performance without the hassle of gas and oil. With its lightweight design, which weighs just under 10 pounds, the P14530ES ensures ease of handling and maneuverability, making it ideal for those who may not have extensive experience with chainsaws.

One of the standout features of the Poulan P14530ES is its easy starting system. Unlike traditional gas chainsaws that can be difficult to start, this electric model eliminates the need for pull cords. Users simply plug it in and press a button, allowing for immediate operation. This makes it particularly user-friendly, especially for novice users or those who might struggle with the pull-start mechanisms found in gas-powered saws.

The chainsaw also comes equipped with a 16-inch steel bar and chain, providing ample cutting capacity for tasks such as trimming, pruning, and cutting firewood. The chain itself is designed for low kickback, ensuring a safer cutting experience while still delivering precision and efficiency. The built-in automatic oiler keeps the chain well-lubricated during use, which minimizes wear and extends the tool's lifespan.

Durability is another key characteristic of the Poulan P14530ES. Constructed with high-quality materials, this chainsaw can withstand the rigors of regular use. It also features a transparent oil reservoir, allowing users to easily monitor oil levels and make sure the chain remains properly lubricated.

Safety features are paramount with the P14530ES, which includes a front hand guard and a chain brake to protect users from unexpected kickback. Additionally, the lightweight design reduces operator fatigue, enabling longer periods of use without discomfort.

In summary, the Poulan P14530ES is a solid choice for anyone looking for a dependable electric chainsaw. With its combination of power, ease of use, and safety features, it effectively meets the needs of homeowners and occasional users alike. Whether it's for yard maintenance or firewood preparation, this chainsaw stands out as a practical and efficient tool.
Top Page Image Contents