Poulan PR624ES owner manual Table of Contents

Page 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impel- ler and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the engine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16. Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufac- tured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECAL ATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity 0.5 Gallons (1,9 Liters)

and Type: Unleaded Regular only

Oil Type

SAE 30 (above 50°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (32° to 50°F)

 

SAE 5W-30 (below 32°F)

 

 

Oil Capacity:

20 Ounces (0,57 Liters)

 

 

Spark Plug:

Champion RN9YC

Gap:

0.030" (0,762 mm)

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

ASSEMBLY / PRE-OPERATION

4-6

OPERATION

7-12

MAINTENANCE SCHEDULE

13

MAINTENANCE

13-14

SERVICE AND ADJUSTMENTS

15-17

STORAGE

18

TROUBLESHOOTING

19

REPAIR PARTS

20-37

WARRANTY

40

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Parts Packed Separately in CartonInstall Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsTo USE Choke Control See Fig HOW to USE Your Snow ThrowerStopping To USE Fuel SHUT-OFF Valve See FigUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Check Engine OIL Level See Fig To Adjust Skid Plates See FigBefore Starting the Engine Scraper BAR See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingMaintenance Engine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Engine Speed To Adjust Cable Tension See FigTo Remove Wheels See Fig CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Auger Bearing Auger HousingKEY Part Description Scraper BARSkid Plate RH Auger Assembly LHAuger Assembly RH Skid Plate LHExploded Impeller Pulley Gearbox Assembly178675X008 Corner Bracket Clean OUT Tool BearingRotator Head LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Cable Assembly Heat ShieldStrap Chute WeldmentDeflector Weldment Deflector SealRepair Parts Snow Thrower - Model NO. PR624ES Handles Interlock CAM Lower TubePivot Support Interlock SpringWasher 3/8 SpacerKnob RED Handle KnobShifter ROD Bottom Impeller ROD AssemblyTraction ROD Assembly Shifter ROD TOPRepair Parts Snow Thrower - Model NO. PR624ES Drive Rubber Ring AssemblyDrive Plate Assembly Speed SelectorClik PIN Axle ShaftRoll PIN 3/16 Sprocket427963X428 Cover AssemblyComplete LCT Engine FrameIdler Pulley Impeller BeltTraction Belt Idler ARM Bracket187866X421 Repair Parts Snow Thrower - Model NO. PR624ES WheelsWheel Assembly LH 187831X421Repair Parts Snow Thrower - Model NO. PR624ES BAG of Parts Safety Ignition KEY422663 DECAL, DANGER, Deflector Repair Parts Snow Thrower - Model NO. PR624ES Decals181037 DECAL, DangerService Notes Service Notes Limited Warranty

PR624ES specifications

The Poulan PR624ES is a powerful and efficient snow blower designed to tackle the challenges of winter weather. Equipped with a 24-inch clearing width and a robust 6.5 horsepower engine, this machine is ideal for homeowners looking to clear medium to large driveways and sidewalks quickly and effectively.

One of the standout features of the PR624ES is its electric start technology. This convenient feature allows users to start the snow blower with the push of a button, eliminating the struggle of pulling a cord in cold weather. This is particularly beneficial during particularly chilly mornings when you want to get the job done efficiently without unnecessary hassle.

The snow blower features a heavy-duty, steel auger that cuts through snow and ice with exceptional precision. This durable construction ensures long-lasting performance, while the efficient design allows for effective snow removal even in heavy, compacted snow. The auger's design also minimizes clogging, ensuring smooth operation throughout the clearing process.

Another important characteristic of the Poulan PR624ES is its adjustable discharge chute. Users can easily direct the snow up to 40 feet away, allowing for greater control over where the snow is deposited. This feature is especially useful when dealing with large accumulations of snow or when needing to keep areas clear for traffic or pedestrians.

The PR624ES is designed for comfort and usability. It comes with ergonomic handles that provide a comfortable grip, reducing fatigue during extended use. Additionally, the snow blower is equipped with a six-speed transmission, including six forward and two reverse speeds, which allows the user to maneuver through varying snow conditions easily.

Enhancing its capabilities further, the Poulan PR624ES includes a headlight that increases visibility in low-light conditions. This is particularly useful for early morning or late evening snow clearing, ensuring that users can operate safely and effectively.

Overall, the Poulan PR624ES stands out as a reliable and user-friendly snow blower, combining power, efficiency, and thoughtful design features that make winter weather management much easier. With its combination of cutting-edge technologies and practical characteristics, it is an excellent choice for any homeowner dealing with snow-covered pathways and driveways.
Top Page Image Contents