Poulan PP414EPS30 owner manual HOW to USE Your Snow Thrower, Stopping

Page 10

OPERATION

The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear

safety glasses or eye shields while operating 00155 your snow thrower or performing any adjust- ments or repairs. We recommend standard safety glasses

or a wide vision safety mask worn over spectacles.

HOW TO USE YOUR SNOW THROWER

Know how to operate all controls before adding fuel or attempting to start the engine.

STOPPING

TRACTION DRIVE

Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

AUGER

Release the auger control lever to stop throwing snow.

ENGINE

1.Move ON / OFF switch to “OFF” position.

2.Remove (do not turn) safety ignition key to prevent unauthorized use.

NOTE: Never use choke to stop engine.

TO USE FUEL SHUT-OFF VALVE (See Fig. 11)

The fuel shut-off valve is located beneath the fuel tank on the engine. Always operate the snow thrower with the fuel shut-off valve in the OPEN position.

OFF

OPEN

FIG. 11

TO USE CHOKE CONTROL (See Fig. 12)

The choke control is located on the engine. Use the choke control whenever you are starting a cold engine. Do not use to start a warm engine.

To engage choke, rotate lever to “FULL” position.

FULL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FIG. 12

TO CONTROL SNOW DISCHARGE (See Fig. 13)

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

If the discharge chute or auger become clogged, shut-off engine and wait for all moving parts to stop. Use the clean-out tool, NOT YOUR HANDS, to unclog the chute and/or auger.

The DIRECTION in which snow is to be thrown is controlled by the discharge chute control lever.

To change the discharge chute position, press downward on discharge chute control lever and move lever left or right until chute is in desired position. Be sure lever springs back and locks into desired position.

DISCHARGE CHUTE

CONTROL LEVER

CHUTE DEFLECTOR

REMOTE CONTROL LEVER

FIG. 13

The DISTANCE that snow is thrown is controlled by the position of the chute deflector. Set the deflector low to throw snow a short distance; set the deflector higher to throw snow farther.

Press downward on chute deflector control lever and move lever forward to lower the deflector and decrease the distance. Move lever back to raise the deflector and increase the distance. Be sure lever springs back and locks into desired position.

TO THROW SNOW (See Fig. 14)

The auger rotation is controlled by the auger control lever located on the right side handle.

Squeeze auger control lever to handle to engage the auger and throw snow.

Release the auger control lever to stop throwing snow.

AUGER

CONTROL

LEVER

10

FIG. 14

 

Image 10
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Operation Know Your Snow ThrowerMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting engineHOW to USE Your Snow Thrower StoppingTo Adjust Skid Plates See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Move Forward and Backward See FigTo USE Drift Cutters See Fig Before Starting the EngineScraper BAR See Fig Check Engine OIL Level See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenMaintenance Cleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Carburetor To Adjust Cable Tension See FigTo Remove Wheels See Fig Engine SpeedFuel System StorageOther Engine OILTroubleshooting Service Notes Exploded KEY Part Description Auger Bearing Auger HousingScrapper BAR Bearing PlugSkid Plate LH Auger Assembly 30 LHAuger Assembly 30 RH Skid Plate RHPlastic Washer Weight BARDrift Cutter BAR Lockwasher 5/16Chute Snow Shield Knob BlackPOP Rivet Shield Retainer StrapRotator Head LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator Pivot BracketRepair Parts Snow Thrower Model PP414EPS30 Handles Lower Tube Loop Handle LHLoop Handle RH Pivot SupportHandle Knob SpacerKnob RED Washer 3/8Carriage Bolt 5/16-18 X 155377 NUT 5/16-18 169675 Axle Shaft Repair Parts Snow Thrower Model PP414EPS30 DriveSprocket Exploded Speed Selector AssemblyDrive Plate Assembly Rubber RingFrame Cover AssemblyComplete LCT Engine 427963X428Idler ARM Bracket Impeller BeltTraction Belt Idler PulleyRepair Parts Snow Thrower Model PP414EPS30 Wheels 196753X421 Wheel Assembly LH196752X421 Cable Bracket LHSafety Ignition KEY Repair Parts Snow Thrower Model PP414EPS30 BAG of Parts422663 DECAL, DANGER, Deflector Repair Parts Snow Thrower Model PP414EPS30 DecalsDECAL, Danger DECAL, InstructionService Notes Service Notes Limited Warranty

PP414EPS30 specifications

The Poulan PP414EPS30 is a powerful and efficient outdoor power tool designed for homeowners and gardening enthusiasts. This chainsaw boasts a variety of features, technologies, and characteristics that make it an excellent choice for both light and heavy-duty applications.

One of the standout features of the Poulan PP414EPS30 is its robust engine. Equipped with a 40cc engine, it delivers ample power to tackle a range of cutting tasks, whether it's felling trees, trimming branches, or cutting firewood. The engine is designed for easy starting and minimal maintenance, thanks to its spring-assisted recoil starter that simplifies the ignition process.

The chainsaw comes with a 16-inch bar and chain, which strike a perfect balance between cutting capacity and maneuverability. This size allows for efficient cutting without being overly cumbersome, making it ideal for homeowners seeking an easy-to-handle tool for their yard maintenance and clean-up needs.

In terms of safety features, the Poulan PP414EPS30 is equipped with an automatic chain oiler that ensures consistent lubrication while in use, prolonging the life of the bar and chain. Additionally, it features a chain brake that quickly stops the chain in case of kickback, enhancing user safety during operation.

The design of the saw prioritizes user comfort, featuring ergonomic handles for a secure grip and reduced vibrations. This is crucial for prolonged use, allowing users to work comfortably without excessive strain. Furthermore, the lightweight construction of the chainsaw means it can be easily maneuvered, reducing fatigue during extended job sessions.

The Poulan PP414EPS30 also incorporates advanced technology such as the Air Filter System, which enhances engine performance and longevity by providing cleaner air intake. This leads to fewer service intervals and prolonged engine life, making it a cost-effective choice in the long run.

Overall, the Poulan PP414EPS30 offers an impressive combination of power, safety, and user-friendly features. With its reliable engine, suitable bar length, and thoughtful design, it stands out as a versatile chainsaw that meets the demands of both occasional users and serious hobbyists alike. Whether for routine yard work or more demanding tasks, this chainsaw is a reliable partner for outdoor maintenance.