Poulan PP414EPS30 Install Discharge Chute / Chute Rotator Head See Fig, Check Tire Pressure

Page 7

ASSEMBLY / PRE-OPERATION

INSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotator head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotator head over chute bracket. If neces- sary, rotatechute assembly to align square and pin on un- derside of chute rotator head with holes in chute bracket.

3.With chute rotator head and chute bracket aligned, position chute rotator head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATOR

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATOR HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

INSTALL CHUTE DEFLECTOR REMOTE CONTROL (See Figs. 8 and 9)

1.Install remote cable bracket to discharge chute with 5/16-18 carriage bolt and 5/16-18 locknut as shown. Tighten securely.

2.Install remote cable eyelet to chute deflector with 1/4-20 shoulder bolt and 1/4-20 locknut as shown. Tighten nut securely. Eyelet will be loose on shoulder bolt.

3.Install spring hooks between hex nuts on chute rotater head and into hole in chute deflector as shown.

1/4-20

SPRING

CHUTE

SHOULDER

DEFLECTOR

BOLT

 

 

HOOK

 

BETWEEN

 

HEX NUTS

 

ON CHUTE

1/4-20

ROTATER

LOCKNUT

HEAD

 

5/16-18

 

CARRIAGE

 

BOLT

CABLE

 

EYELET

 

REMOTE

 

CABLE

 

BRACKET

 

5/16-18

 

LOCKNUT

 

FIG. 8

CHUTE DEFLECTOR

CONTROL LEVER

FIG. 9

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Know Your Snow Thrower OperationRecoil auxiliary starter handle used for starting engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Adjust Skid Plates See FigCheck Engine OIL Level See Fig Before Starting the EngineScraper BAR See Fig To USE Drift Cutters See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingMaintenance Engine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Engine Speed To Adjust Cable Tension See FigTo Remove Wheels See Fig CarburetorEngine OIL StorageOther Fuel SystemTroubleshooting Service Notes Exploded KEY Part Description Bearing Plug Auger HousingScrapper BAR Auger BearingSkid Plate RH Auger Assembly 30 LHAuger Assembly 30 RH Skid Plate LHLockwasher 5/16 Weight BARDrift Cutter BAR Plastic WasherShield Retainer Strap Knob BlackPOP Rivet Chute Snow ShieldRotator Pivot Bracket LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator HeadRepair Parts Snow Thrower Model PP414EPS30 Handles Pivot Support Loop Handle LHLoop Handle RH Lower TubeWasher 3/8 SpacerKnob RED Handle KnobCarriage Bolt 5/16-18 X 155377 NUT 5/16-18 169675 Axle Shaft Repair Parts Snow Thrower Model PP414EPS30 DriveSprocket Exploded Rubber Ring AssemblyDrive Plate Assembly Speed Selector427963X428 Cover AssemblyComplete LCT Engine FrameIdler Pulley Impeller BeltTraction Belt Idler ARM BracketRepair Parts Snow Thrower Model PP414EPS30 Wheels Cable Bracket LH Wheel Assembly LH196752X421 196753X421Safety Ignition KEY Repair Parts Snow Thrower Model PP414EPS30 BAG of Parts422663 DECAL, Instruction Repair Parts Snow Thrower Model PP414EPS30 DecalsDECAL, Danger DECAL, DANGER, DeflectorService Notes Service Notes Limited Warranty

PP414EPS30 specifications

The Poulan PP414EPS30 is a powerful and efficient outdoor power tool designed for homeowners and gardening enthusiasts. This chainsaw boasts a variety of features, technologies, and characteristics that make it an excellent choice for both light and heavy-duty applications.

One of the standout features of the Poulan PP414EPS30 is its robust engine. Equipped with a 40cc engine, it delivers ample power to tackle a range of cutting tasks, whether it's felling trees, trimming branches, or cutting firewood. The engine is designed for easy starting and minimal maintenance, thanks to its spring-assisted recoil starter that simplifies the ignition process.

The chainsaw comes with a 16-inch bar and chain, which strike a perfect balance between cutting capacity and maneuverability. This size allows for efficient cutting without being overly cumbersome, making it ideal for homeowners seeking an easy-to-handle tool for their yard maintenance and clean-up needs.

In terms of safety features, the Poulan PP414EPS30 is equipped with an automatic chain oiler that ensures consistent lubrication while in use, prolonging the life of the bar and chain. Additionally, it features a chain brake that quickly stops the chain in case of kickback, enhancing user safety during operation.

The design of the saw prioritizes user comfort, featuring ergonomic handles for a secure grip and reduced vibrations. This is crucial for prolonged use, allowing users to work comfortably without excessive strain. Furthermore, the lightweight construction of the chainsaw means it can be easily maneuvered, reducing fatigue during extended job sessions.

The Poulan PP414EPS30 also incorporates advanced technology such as the Air Filter System, which enhances engine performance and longevity by providing cleaner air intake. This leads to fewer service intervals and prolonged engine life, making it a cost-effective choice in the long run.

Overall, the Poulan PP414EPS30 offers an impressive combination of power, safety, and user-friendly features. With its reliable engine, suitable bar length, and thoughtful design, it stands out as a versatile chainsaw that meets the demands of both occasional users and serious hobbyists alike. Whether for routine yard work or more demanding tasks, this chainsaw is a reliable partner for outdoor maintenance.
Top Page Image Contents