Safety Instructions

Installation Notes

–Concrete and wood block walls limit signal penetration to three or four walls.

–A signal can penetrate five or six walls constructed of drywall or wood.

–A thick metal wall causes signals to reflect off, causing poor penetration.

–A chain link fence or wire mesh spaced between 1 and 1 1/2 in. (2.5 and 3.8 cm) acts as a harmonic reflector that blocks a 2.4 Ghz radio signal.

•Install the antenna away from microwave ovens and 2-GHz cordless phones. These products can cause signal interference because they operate in the same frequency range as the device to which your antenna is connected.

•Install the antenna horizontally to maximize signal propagation.

Installation Notes

This antenna is designed to be mounted indoors on a suspended ceiling track having either flush or recessed mounted ceiling tiles.

Follow these safety instructions when installing your antenna.

•Plan your installation procedure carefully and completely before you begin.

•If you are installing an antenna for the first time, for your own safety as well as others, seek professional assistance. Consult your dealer, who can explain which mounting method to use for the location where you intend to install the antenna.

•Select your installation site with safety, as well as performance, in mind. Remember that electric power cables and telephone lines look alike. For your safety, assume that any line is an electric power line until determined otherwise.

•Call your local power company or building maintenance organization if you are unsure about cables close to your mounting location.

•When installing your antenna, do not use a metal ladder. Do dress properly - shoes with rubber soles and heels, rubber gloves, and a long sleeved shirt or jacket.

•If an accident or emergency occurs with the power lines, call for qualified emergency help immediately.

Installation Instructions

The following sections contain procedures for installing the antenna on a suspended ceiling.

Suspended Ceilings With Flush Mounted Tiles

The antenna is configured to mount to a suspended ceiling track with flush mounted tiles. No modifications are necessary. After you have selected a suitable location, follow these steps to mount your antenna. It may be helpful to examine the illustration below before you install the antennas.

Cisco Aironet 2 dBi Diversity Omnidirectional Ceiling Mount Antenna (AIR-ANT5959)

	78-13213-03	3

AIR-ANT5959 specifications

Cisco Systems is a renowned name in the networking and telecommunications industry, and one of its standout products is the AIR-ANT5959. This antenna is designed to enhance wireless communication for various Cisco wireless access points, making it a vital component for organizations looking to improve their network performance.

The AIR-ANT5959 is a dual-band antenna that operates in the 2.4 GHz and 5 GHz frequency bands. It supports 802.11n and 802.11ac Wi-Fi standards, which are crucial for delivering high-speed wireless connectivity. This antenna is particularly suitable for environments where robust wireless connections are necessary, such as offices, schools, and warehouses.

One of the main features of the AIR-ANT5959 is its omnidirectional radiation pattern. This design allows the antenna to distribute signals uniformly in all directions, ensuring consistent coverage throughout the intended area. This characteristic is particularly beneficial for creating a seamless wireless experience, minimizing dead spots, and providing strong connectivity for mobile devices.

The antenna is constructed with high-quality materials, allowing it to withstand various environmental conditions. This reliability is essential for outdoor deployments or in challenging indoor settings. Furthermore, the AIR-ANT5959 has a gain of 5 dBi on both frequency bands, which enhances the signal strength and extends the coverage area, making it an effective solution for larger spaces.

Another notable aspect of the AIR-ANT5959 is its versatility in mounting options. It can be easily installed on walls, ceilings, or poles, providing flexibility for network administrators to optimize placement based on specific coverage requirements. This adaptability contributes to the overall efficiency of the wireless network.

In summary, the Cisco AIR-ANT5959 antenna is an outstanding choice for organizations seeking to bolster their wireless infrastructure. Its dual-band operation, omnidirectional radiation pattern, high durability, and flexible mounting options make it a robust solution for delivering reliable wireless connectivity. By integrating the AIR-ANT5959 into their networks, businesses can ensure a high-performance wireless environment that supports modern connectivity needs. Whether used for standard office applications or demanding data-intensive tasks, this antenna remains a valuable asset in the ever-evolving landscape of wireless communications.