Auger Control
Recoil Starter |
|
|
| |
Gasoline Cap |
|
|
| |
Chute Control Handle |
|
|
| |
Chute | Ignition Key | Oil Fill |
| |
Assembly |
|
| ||
Primer |
|
| ||
|
|
| ||
|
|
| Gasoline | |
|
|
| Cap | |
Oil Fill | Throttle |
| Electric | |
| Control |
| Starter | |
|
|
| Button | |
Shave Plate | Choke |
|
| |
Control |
|
| ||
|
| Electric | ||
|
|
| ||
| Oil Drain | Recoil | Starter | |
Auger | Outlet | |||
| ||||
|
| Starter |
|
Figure
4
Know
Your Snow
Thrower
WARNING
Be familiar with all the controls on the snow thrower and their proper operation. Know how
Choke Lever
Activating choke control closes the choke plate on carburetor and aids in starting engine. Refer to the engine manual packed with unit for more detailed instructions.
Primer
Depressing primer forces fuel directly into engine’s carburetor to aid in
Ignition Key
The ignition key must be inserted and snapped in place in order for the engine to start. Remove the ignition key to prevent unauthorized use of equipment. Do NOT attempt to turn the key.
Recoil Starter
The starter handle is used to manually start the engine.
Electric Starter (If Equipped)
Used to start engine with a 120V power source.
NOTE: On certain models the electric starter is located on the right side of the shroud.
Plug for Electric Start
Requires use of a
Auger
When engaged, the augers rotation draws snow into the auger housing and throws it out the discharge chute. Rubber paddles on the augers also aid in propelling the unit as they come in contact with the pavement.
Auger Control Handle
Located on the upper handle, the auger control handle is used to engage and disengage drive to the auger. Squeeze the control handle against the upper handle to engage auger; release it to disengage.
Discharge Chute / Chute Handle
Refer to
Shave Plate
The shave plate maintains contact with pavement as the snow thrower is propelled, allowing snow close to pavement’s surface to be discharged.
to stop the machine and disengage them quickly.
7