Snapper E11305, E9265 STARTING, Operation & Stopping Recoil Start Models

Page 9

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST

2.1.9.Check the AC electrical outlet that will be used and make sure it is a polarized outlet. The machine has a polarized plug (one blade of plug is wider than the other) that will accept a polarized extension cord. The extension cord will fit into a polarized outlet (receptacle) only one way. If plug does not fit fully into your outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper polarized outlet. DO NOT modify or change this polarized plug in any way.

2.2STARTING, OPERATION & STOPPING (RECOIL START MODELS)

(Go to Page 11 for Electric Start Models)

2.2.1.ENGINE

1.Turn fuel shut off valve to the “ON” position. See Figure 2.3.

TURN VALVE TO “ON” POSITION

FIGURE 2.3

2.Insert key into ignition switch. See Figure 2.4.

3.Move choke control to the choke, “ON” position. See Figure 2.4.

4.Move engine speed control to the “FAST” position. See Figure 2.4.

5.Push primer button three times to start a cold engine. NOTE: Do not use primer button to start warm engine. See Figure 2.4.

IMPORTANT: Stop the auger/impeller and wheel drive by releasing the auger/impeller and wheel drive control levers. Stop the engine by moving the engine speed control to stop or removing the key from the switch.

MOVE CHOKE TO THE “ON” POSITION

PUSH PRIMER

THREE TIMES

MOVE ENGINE

SPEED CONTROL

TO FAST

INSERT

KEY

FIGURE 2.4

6.Pull rope start handle to crank engine.

7.After engine starts, move the choke control to the no choke, “OFF” position. Allow a brief warm-up until engine runs smooth.

(Continued on Next Page)

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model Number Explanation Model Designation Series Designation Engine HP Auger WidthInstruction No -3336 I.R /14/00 Operational Precautions Protection for ChildrenPreparation Maintenance and Storage Table of Contents European Community Hearing Protection Required Forward Reverse Ground Speed ControlRabbit / Fast Turtle / Slow Neutral Year of Manufacture Safety Instructions to Prevent Injury Nomenclature IntroductionPRE-START Check List Minimum Gauge for Cord SetsGo to Page 11 for Electric Start Models Engine STARTING, Operation & Stopping Recoil Start ModelsDischarge Chute and Deflector Adjustment Engaging AugerEngaging Wheel Drive STARTING, Operation & Stopping Electric Start Models Free Wheel Machine Stopping ENGINE, Auger & Wheel DriveGeneral Lubrication Service After First 5 Hours Check Auger Drive BeltGear CASE, Auger Shaft and Auger Bearing Lubrication Check Wheel Drive BeltMaintenance and Service Parts Storage ProcedureAnnually END of Each Season Engine Spark PlugAuger Belt Adjustment Idler Pulley Adjustment Auger and Drive Belt Adjustment Cable AdjustmentRecheck cable for proper extension Reinstall belt cover Repair & Adjustments Skid Shoe Adjustment Single Handle Control Adjustment Rubber Drive Tire Replacement Chute Crank AdjustmentService Performed Each Problem Probable Cause Corrective Action100 USE HRS SeasonDisclaimer of Warranty Year Limited WarrantyPage European TWO Stage Large Frame Snow Thrower Series
Related manuals
Manual 28 pages 34.11 Kb

E11305, E9265 specifications

Snapper E9265, 10305E, 8265, E10305E, and E11305 are part of an innovative line of electric snapper products designed to provide robust performance and versatility across various applications. These models represent the intersection of advanced technology and user-centric design, catering to both professionals and DIY enthusiasts.

One of the main features of these snapper models is their powerful motor. With high torque output, these devices can effortlessly tackle challenging materials, ensuring efficient operation in a range of conditions. This motor is engineered for durability and longevity, minimizing the need for maintenance while maximizing productivity.

The E9265 and E10305E feature cutting-edge brushless motor technology, which not only enhances performance but also increases energy efficiency. This feature is particularly beneficial for users who prioritize sustainability and seek to reduce their carbon footprint. The brushless motor extends the life of the tool and is quieter in operation compared to traditional brushed motors, making it ideal for use in residential areas or noise-sensitive environments.

Additionally, these models come equipped with advanced battery technology, featuring lithium-ion power packs that provide longer runtime and faster charging capabilities. Users can enjoy extended working periods without the anxiety of running out of power mid-task. The snapper line also integrates intelligent battery management systems that monitor charge levels and optimize power usage, prolonging battery life.

In terms of user experience, the Snapper E9265, 10305E, and other variants boast ergonomic designs that prioritize comfort and control. Anti-vibration handles reduce user fatigue during prolonged use, while variable speed settings allow for a customizable approach to different tasks. The lightweight construction of these tools enhances maneuverability, making them suitable for both heavy-duty applications and delicate work.

In addition to performance and comfort, safety features are a top priority in these models. Equipped with automatic shut-off functions and protective casing, the snapper tools ensure that users can operate them with confidence. This attention to safety doesn't compromise on efficiency, as these tools are built to deliver precise and powerful results.

Overall, the Snapper E9265, 10305E, 8265, E10305E, and E11305 embody a perfect blend of technology, performance, and user-friendly design. They are engineered to exceed the expectations of users across various fields, from construction to home improvement, making them a valuable addition to any toolkit. Whether you are a seasoned professional or a weekend warrior, Snapper offers a reliable solution that meets the demands of modern projects.
Top Page Image Contents