Protection for Children, Preparation

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following instructions may result in serious injury to the operator or other persons. The owner of the snow thrower must understand these instructions and, furthermore, must allow only persons who understand these instructions to operate snow thrower. Each person operating the snow thrower must be of sound mind and body and must not be under the influence of any substance which might impair vision, dexterity, or judgment. If you have any questions pertaining to your snow thrower which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: 800/935-2967.

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the snow removal activity. Never assume that the children will remain where you last saw them.

1.DO NOT allow children in the area when snow thrower is being operated.

2.DO NOT allow pre-teenage children to operate snow thrower.

3.ALLOW only responsible adults and teenagers with mature judgment to operate the machine and then only after being thoroughly instructed and under the close supervision of an experienced adult operator.

4.Keep the area clear of all persons, particularly small children and pets.

5.Know how to STOP the snow thrower and disengage the controls quickly.

PREPARATION

(Continued From Previous Column)

7.Survey the area to be cleared beforehand and plan where snow is to be blown. Be prepared to release auger/impeller clutch or to change discharge chute direction quickly to discharge away from windows, cars, buildings and doorways to avoid property damage or personal injury from hurled objects.

8.Use only approved extension cords and receptacles in good condition and with sufficient capacity to carry the current to the machine if equipped with electric starting motors.

9.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Store only in an approved fuel container. Never remove fuel cap or add fuel with the engine running. Add fuel outdoors only with the engine stopped and cool. Clean spilled fuel and oil from machine. DO NOT smoke. DO NOT run engine indoors.

PREPARATION

1.Warn everyone in advance to stay clear of area. Keep especially watchful for children and pets darting into area while operating.

2.Read, understand, and follow instructions and warnings in this manual and on the machine. Know the controls and the proper use of the snow thrower before starting.

3.Data indicates that operators, age 60 and above, are involved in a large percentage of snow thrower-related injuries. These operators should evaluate their ability to operate the snow thrower safely enough to protect themselves and others from serious injury.

4.Disengage all clutches and shift into neutral before starting the engine (motor).

5.Wear adequate winter clothing including boots which will give you maximum footing on slippery surfaces. Exercise CAUTION to avoid slipping or falling.

6.Before the first snow fall, check the area to be cleared and remove all objects such as doormats, sticks, toys, wires, rocks, etc., which could be hurled or jam the snow thrower

OPERATIONAL PRECAUTIONS

1.Before starting, make visual check to make sure auger/impeller housing is clear and all guards and shields are in place and tight.

2.DO NOT operate machine without proper guards shields, deflectors, or other safety protective devices in place and functioning properly.

3.Should the auger/impeller become clogged, release the auger/impeller clutch control and, as an additional precaution, STOP the engine before attempting to unclog the auger/impeller or discharge chute.

4.DO NOT attempt to unclog the auger/impeller or discharge chute by reaching in with your hands. Use a long stick or similar implement to unclog.

5.DO NOT attempt to unclog the auger/impeller or discharge chute with the engine running. STOP engine and remove key.

6.STOP engine (motor) and remove key before leaving the operator position for any reason.

E11305, E9265 specifications

Snapper E9265, 10305E, 8265, E10305E, and E11305 are part of an innovative line of electric snapper products designed to provide robust performance and versatility across various applications. These models represent the intersection of advanced technology and user-centric design, catering to both professionals and DIY enthusiasts.

One of the main features of these snapper models is their powerful motor. With high torque output, these devices can effortlessly tackle challenging materials, ensuring efficient operation in a range of conditions. This motor is engineered for durability and longevity, minimizing the need for maintenance while maximizing productivity.

The E9265 and E10305E feature cutting-edge brushless motor technology, which not only enhances performance but also increases energy efficiency. This feature is particularly beneficial for users who prioritize sustainability and seek to reduce their carbon footprint. The brushless motor extends the life of the tool and is quieter in operation compared to traditional brushed motors, making it ideal for use in residential areas or noise-sensitive environments.

Additionally, these models come equipped with advanced battery technology, featuring lithium-ion power packs that provide longer runtime and faster charging capabilities. Users can enjoy extended working periods without the anxiety of running out of power mid-task. The snapper line also integrates intelligent battery management systems that monitor charge levels and optimize power usage, prolonging battery life.

In terms of user experience, the Snapper E9265, 10305E, and other variants boast ergonomic designs that prioritize comfort and control. Anti-vibration handles reduce user fatigue during prolonged use, while variable speed settings allow for a customizable approach to different tasks. The lightweight construction of these tools enhances maneuverability, making them suitable for both heavy-duty applications and delicate work.

In addition to performance and comfort, safety features are a top priority in these models. Equipped with automatic shut-off functions and protective casing, the snapper tools ensure that users can operate them with confidence. This attention to safety doesn't compromise on efficiency, as these tools are built to deliver precise and powerful results.

Overall, the Snapper E9265, 10305E, 8265, E10305E, and E11305 embody a perfect blend of technology, performance, and user-friendly design. They are engineered to exceed the expectations of users across various fields, from construction to home improvement, making them a valuable addition to any toolkit. Whether you are a seasoned professional or a weekend warrior, Snapper offers a reliable solution that meets the demands of modern projects.