Snapper E9266, E11306 Year of Manufacture Safety Instructions to Prevent Injury

Page 6

DECALS

READ, UNDERSTAND & FOLLOW all manuals and instructions furnished with the Snowthrower.

DANGER FIRE HAZARD. Remove fuel from fuel tank and carburetor before tipping machine.

YEAR OF MANUFACTURE

DANGER – ROTATING AUGER. KEEP AWAY.

SAFETY INSTRUCTIONS TO PREVENT INJURY:

1) Read Owner’s Manual for operating and safety

instructions.

SOUND POWER LEVEL

2)Observe all labels and instructions.

3)DO NOT defeat safety features of controls. They are for your protection.

4)Stop engine, wait for all moving parts to stop, remove spark plug wire before unclogging or servicing machine.

5)Never allow children to operate the equipment. Never allow adults to operate equipment without proper instruction.

6)Keep area of operations clear of all persons, especially children.

7)Never direct discharge at bystanders or allow anyone in front of unit.

8)Keep machine properly maintained and serviced with all shields, guards, or protective devices in place.

6

Image 6
Contents Model Number Explanation Model Designation Series Designation Engine HP Auger WidthInstruction No -4243 I.R /15/01 Operational Precautions Protection for ChildrenPreparation Maintenance and Storage Table of Contents European Community Hearing Protection Required Forward Reverse Ground Speed ControlRabbit / Fast Turtle / Slow Neutral Year of Manufacture Safety Instructions to Prevent Injury Sound Power LevelIntroduction NomenclatureMinimum Gauge for Cord Sets PRE-START Check ListSTARTING, Operation & Stopping Recoil Start Models Go to Page 11 for Electric Start Models EngineDischarge Chute and Deflector Adjustment Engaging AugerEngaging Wheel Drive STARTING, Operation & Stopping Electric Start Models Stopping ENGINE, Auger & Wheel Drive Free Wheel MachineGear CASE, Auger Shaft and Auger Bearing Lubrication Service After First 5 Hours Check Auger Drive BeltGeneral Lubrication Check Wheel Drive BeltAnnually END of Each Season Storage ProcedureMaintenance and Service Parts Engine Spark PlugAuger and Drive Belt Adjustment Cable Adjustment Auger Belt Adjustment Idler Pulley AdjustmentRecheck cable for proper extension Reinstall belt cover Repair & Adjustments Skid Shoe Adjustment Single Handle Control Adjustment Chute Crank Adjustment Rubber Drive Tire Replacement100 Problem Probable Cause Corrective ActionService Performed Each USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPage European TWO Stage Large Frame Snow Thrower Series