Section 4 - REPAIR & ADJUSTMENTS
4.1.5. SKID SHOE ADJUSTMENT
NOTE: It is recommended to raise the auger/impeller housing when clearing rough or graveled surfaces. To raise auger/impeller the skid shoes should be lowered.
1.Tilt machine up and place a wooden block under auger/impeller housing.
2.Loosen bolts on both skid shoes. Move shoes down to raise auger/impeller housing or move skid shoes up to lower auger/impeller housing. See Figure 4.8.
SCRAPER BLADE
|
| SKID | |
|
| SHOE | |
SKID |
| LOOSEN CARRIAGE | |
BLOCK | |||
SHOE | BOLTS TO SHIFT | ||
| |||
|
| SCRAPER BLADE |
UP FOR SMOOTH, PAVED SURFACES
DOWN FOR ROUGH, GRAVELED SURFACES
FIGURE 4.8
18