Snapper LE3171R, LE3191R, LE3191E Introduction, Check Auger Flite Shoe, Storage Procedure

Page 11

Section 3 - MAINTENANCE

3.1INTRODUCTION

To retain the quality of the snow thrower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular snow thrower, always mention model and serial number.

3.2SERVICE - AFTER FIRST 5 HOURS

3.2.1 CHECK AUGER DRIVE BELT

1.Visually check engine drive belt for cracking, fraying, severed or exposed belt strands. Replace worn belt before operating snow thrower. See Figure 3.1

3.2.3CHECK AUGER CLUTCH CONTROL CABLE 1. Visually check cable for fraying, kinking or severed cable strands. Replace cable and adjust tension before operating snow thrower. See Figure 3.3.

CHECK AUGER DRIVE BELT

CHECK AUGER CONTROL CABLE

FIGURE 3.3

FIGURE 3.1

3.2.2 CHECK AUGER FLITE SHOE

1.Visually check flite shoes for cracking, fraying severed or exposed belt strands. Replace worn flite shoes before operating snow thrower. See Figure

CHECK AUGER

FLITE SHOE

FIGURE 3.2

11

3.3 ANNUALLY (END OF EACH SEASON)

Perform all maintenance as described in the maintenance schedule.

3.3.1. Engine

Refer to engine owner’s manual for service instructions.

3.3.2. Spark Plug

Refer to engine owner’s manual for service instructions.

3.4 STORAGE PROCEDURE

Refer to the Engine Owner’s Manual for directions regarding engine storage preparations. Prepare the snow thrower for “end of season” storage as follows:

1.Drain fuel from fuel tank and let engine run until all fuel is out of the carburetor.

2.Disconnect and remove the spark plug wire away from spark plug before any other preparations are made!

3.Tape all openings closed to prevent spraying water into exhaust or air intakes during washing.

4.Tilt snow thrower up on its wheels and thoroughly clean the underside of the auger.

5.Lubricate all exposed metal with a light coating of oil to prevent corrosion. DO NOT place any type of lubrication onto belt or pulleys.

6.Store the machine in a shed or other dry area, protected from weather.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model Number Explanation Single Stage Small Frame Snow Thrower SeriesPreparation Operational PrecautionsProtection for Children Safe Handling of Gasoline Clearing a Clogged Discharge ChuteMaintenance and Storage Table of Contents Gasoline Cycle OIL PRE-START Check ListMinimum Gauge for Cord Sets Engaging Auger Stopping Operating Instructions Check Auger Flite Shoe Service After First 5 Hours Check Auger Drive BeltStorage Procedure IntroductionAuger Belt Idler Pulley Adjustment Auger Belt Cable AdjustmentFrom Previous Auger Belt ReplacementRepair & Adjustments Corrective Action Problem Probable CauseService Performed Each MAINTENANCE/REPLACEMENT PartsDisclaimer of Warranty Year Limited WarrantySnapper Product Registration Form Single Stage Small Frame Snow Thrower Series

LE3171R, LE3191R, LE3191E specifications

The Snapper LE3171R, LE3191R, and LE3191E are part of Snapper’s innovative line of lawn mowers, designed to meet the diverse needs of lawn enthusiasts and professionals alike. Each model presents a unique blend of features, advanced technologies, and robust characteristics, ensuring efficient and effective lawn care.

The Snapper LE3171R is powered by a reliable engine that provides ample torque and performance for tackling various grass types. Its cutting deck is designed for a precise and clean cut, ensuring a professional finish for residential and commercial lawns. The model boasts a compact size, making it nimble enough to navigate tight spaces and flower beds with ease. Featuring a user-friendly design, assembling and starting the LE3171R is straightforward, appealing to both seasoned operators and those new to lawn maintenance.

Moving to the LE3191R, this model takes performance to another level with a more powerful engine, allowing for faster mowing speeds and enhanced durability. The LE3191R is equipped with a larger cutting deck, which underlines its capacity for handling larger areas efficiently. It incorporates advanced mulching technology, which finely chops grass clippings, returning nutrients to the soil and reducing the need for fertilizer. This model is designed with operator comfort in mind, offering adjustable handle heights to suit various user preferences, ensuring a comfortable mowing experience.

The Snapper LE3191E variant emphasizes eco-friendliness and efficiency with its innovative electric motor. Perfect for those who prioritize sustainability, the LE3191E operates quietly without the emissions typical of gas engines. This model features a robust battery system that provides ample runtime for cutting medium to large lawns without interruption. Additionally, it includes smart technology, allowing users to monitor battery levels and even schedule mowing sessions through a dedicated app, enhancing convenience and user control.

All three models are characterized by their sturdy construction and reliable performance, showcasing Snapper’s commitment to quality. Each mower incorporates safety features such as blade brake systems and ergonomic controls, ensuring user safety during operation. The LE3171R, LE3191R, and LE3191E reflect Snapper’s dedication to creating versatile, efficient, and user-centric mowing solutions tailored for today's diverse lawn care needs. These models are indeed ideal choices for any homeowner or professional landscaper looking to achieve the perfect lawn.
Top Page Image Contents