Snapper LE3171R, LE3191R, LE3191E important safety instructions Engaging Auger

Page 8

Section 2 - OPERATING INSTRUCTIONS

2.2STARTING, STOPPING & OPERATION (RECOIL START MODELS)

2.2.1. ENGINE & AUGER

1.Move choke control to the choke “ON” position. See Figure 2.5.

NOTE: Stop the auger by releasing the auger control. Stop the engine by turning the key switch to the “OFF” position.

(SHOWN IN “OFF POSITION) TURN KEY TO THE “ON”

PUSH PRIMERPOSITION THREE TIMES

WARNING

Release auger clutch control and make sure auger/impeller has STOPPED before rotating discharge chute or adjusting deflector. DO NOT place hands near auger/impeller while engine is running.

2.2.3.DISCHARGE CHUTE and DEFLECTOR ADJUSTMENT

1.Release auger control and allow auger to come to a complete stop before performing any adjustments.

2.Loosen deflector knob and position deflector to desired angle. Retighten knob.

3.Rotate discharge chute in desired direction. See Figure 2.7.

MOVE AUGER CONTROL

AGAINST HANDLE TO

ENGAGE AUGER

PULL ROPE

START HANDLE

(SHOWN IN “OFF POSITION) MOVE CHOKE TO THE “ON” POSITION

FIGURE 2.5

2.Turn ignition key to the “ON” position.

3.Push primer button three times to start a cold engine. NOTE: Do not use primer button to start warm engine.

4.Pull rope start handle to crank engine.

5.After engine starts, move the choke control to the no choke “OFF” position. Allow a brief warm-up until engine runs smooth.

WARNING

Objects can be thrown by the snow thrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from area.

2.2.2. ENGAGING AUGER

1.Pull auger control against handle to engage auger. See Figure 2.6.

RELEASE AUGER CONTROL

BEFORE ADJUSTING

DEFLECTOR & CHUTE

FIGURE 2.6

DEFLECTOR

CHUTE

LOOSEN DEFLECTOR

KNOB & MOVE TO

DESIRED POSITION

ROTATE CHUTE TO

CHANGE

DIRECTION OF

DISCHARGE

FIGURE 2.7

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Single Stage Small Frame Snow Thrower Series Model Number ExplanationPreparation Operational PrecautionsProtection for Children Clearing a Clogged Discharge Chute Safe Handling of GasolineMaintenance and Storage Table of Contents PRE-START Check List Gasoline Cycle OILMinimum Gauge for Cord Sets Engaging Auger Stopping Operating Instructions Service After First 5 Hours Check Auger Drive Belt Storage ProcedureIntroduction Check Auger Flite ShoeAuger Belt Cable Adjustment Auger Belt Idler Pulley AdjustmentAuger Belt Replacement From PreviousRepair & Adjustments Problem Probable Cause Service Performed EachMAINTENANCE/REPLACEMENT Parts Corrective ActionYear Limited Warranty Disclaimer of WarrantySnapper Product Registration Form Single Stage Small Frame Snow Thrower Series

LE3171R, LE3191R, LE3191E specifications

The Snapper LE3171R, LE3191R, and LE3191E are part of Snapper’s innovative line of lawn mowers, designed to meet the diverse needs of lawn enthusiasts and professionals alike. Each model presents a unique blend of features, advanced technologies, and robust characteristics, ensuring efficient and effective lawn care.

The Snapper LE3171R is powered by a reliable engine that provides ample torque and performance for tackling various grass types. Its cutting deck is designed for a precise and clean cut, ensuring a professional finish for residential and commercial lawns. The model boasts a compact size, making it nimble enough to navigate tight spaces and flower beds with ease. Featuring a user-friendly design, assembling and starting the LE3171R is straightforward, appealing to both seasoned operators and those new to lawn maintenance.

Moving to the LE3191R, this model takes performance to another level with a more powerful engine, allowing for faster mowing speeds and enhanced durability. The LE3191R is equipped with a larger cutting deck, which underlines its capacity for handling larger areas efficiently. It incorporates advanced mulching technology, which finely chops grass clippings, returning nutrients to the soil and reducing the need for fertilizer. This model is designed with operator comfort in mind, offering adjustable handle heights to suit various user preferences, ensuring a comfortable mowing experience.

The Snapper LE3191E variant emphasizes eco-friendliness and efficiency with its innovative electric motor. Perfect for those who prioritize sustainability, the LE3191E operates quietly without the emissions typical of gas engines. This model features a robust battery system that provides ample runtime for cutting medium to large lawns without interruption. Additionally, it includes smart technology, allowing users to monitor battery levels and even schedule mowing sessions through a dedicated app, enhancing convenience and user control.

All three models are characterized by their sturdy construction and reliable performance, showcasing Snapper’s commitment to quality. Each mower incorporates safety features such as blade brake systems and ergonomic controls, ensuring user safety during operation. The LE3171R, LE3191R, and LE3191E reflect Snapper’s dedication to creating versatile, efficient, and user-centric mowing solutions tailored for today's diverse lawn care needs. These models are indeed ideal choices for any homeowner or professional landscaper looking to achieve the perfect lawn.
Top Page Image Contents