Minimum Gauge for Cord Sets

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST (Continued from Previous Page)

Make the following checks and perform the service required before each start-up.

WARNING

DO NOT use an electrical extension cord that is damaged. A damaged electrical extension cord could cause a shock or fire. Thoroughly inspect electrical extension cord before using machine. If cord is damaged, do not use and do not operate machine. Replace damaged cord immediately. Contact your SNAPPER service dealer for assistance. To reduce the risk of electric shock, use only with an extension cord intended for outdoor use having a cord type: SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A or SJTOW-A.

2.1.7.Check and make sure extension cord is in good condition. Extension cord should not have any broken insulation or exposed wires. Use an extension cord that is heavy enough to carry the correct amount of current to the machine. See Figure 2.3 for correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge cord.

120 Volt		Total Length of Cord in Feet
Rating - Amps		25 ft.	50 ft.	100 ft.	150 ft.
More	Not More		A.W.G.
Than	Than		A.W.G.
Than	Than
0	6	18	16	16	14
6	10	18	16	14	12
10	12	16	16	14	12
12	16	14	12	Not
				Recommended

FIGURE 2.3

2.1.8.Check the AC electrical outlet that will be used and make sure it is a polarized outlet. The machine has a polarized plug (one blade of plug is wider than the other blade) that will accept a polarized extension cord. The extension cord will fit into a polarized outlet (receptacle) only one way. If plug does not fit fully into your outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper polarized outlet. DO NOT modify or change this polarized plug in any way.

IMPORTANT! Electric Start Kit optional accessory on some models.

DANGER

DO NOT clean out discharge chute with hands. Contact with moving parts inside chute will cause serious injury. Use clean out tool provided with machine.

2.1.9Check to make sure that the clean-out tool is attached to the handle on the machine. Do not operate the machine without the clean-out tool properly stored on the handle.

CLEARING A CLOGGED DISCHARGE CHUTE

Hand contact with the rotating auger/impeller inside the discharge chute is the most common cause of injury associated with snow throwers. DO NOT use your hand to clean out the discharge chute. To clear the chute:

1.STOP the engine. Remove the key.

2.Wait 10 seconds to be sure the auger/impeller blades have stopped rotating.

3.Always use the clean-out tool. DO NOT use your hands.

CLEAN-OUT

TOOL

FIGURE 2.4

LE3171R, LE3191R, LE3191E specifications

The Snapper LE3171R, LE3191R, and LE3191E are part of Snapper’s innovative line of lawn mowers, designed to meet the diverse needs of lawn enthusiasts and professionals alike. Each model presents a unique blend of features, advanced technologies, and robust characteristics, ensuring efficient and effective lawn care.

The Snapper LE3171R is powered by a reliable engine that provides ample torque and performance for tackling various grass types. Its cutting deck is designed for a precise and clean cut, ensuring a professional finish for residential and commercial lawns. The model boasts a compact size, making it nimble enough to navigate tight spaces and flower beds with ease. Featuring a user-friendly design, assembling and starting the LE3171R is straightforward, appealing to both seasoned operators and those new to lawn maintenance.

Moving to the LE3191R, this model takes performance to another level with a more powerful engine, allowing for faster mowing speeds and enhanced durability. The LE3191R is equipped with a larger cutting deck, which underlines its capacity for handling larger areas efficiently. It incorporates advanced mulching technology, which finely chops grass clippings, returning nutrients to the soil and reducing the need for fertilizer. This model is designed with operator comfort in mind, offering adjustable handle heights to suit various user preferences, ensuring a comfortable mowing experience.

The Snapper LE3191E variant emphasizes eco-friendliness and efficiency with its innovative electric motor. Perfect for those who prioritize sustainability, the LE3191E operates quietly without the emissions typical of gas engines. This model features a robust battery system that provides ample runtime for cutting medium to large lawns without interruption. Additionally, it includes smart technology, allowing users to monitor battery levels and even schedule mowing sessions through a dedicated app, enhancing convenience and user control.

All three models are characterized by their sturdy construction and reliable performance, showcasing Snapper’s commitment to quality. Each mower incorporates safety features such as blade brake systems and ergonomic controls, ensuring user safety during operation. The LE3171R, LE3191R, and LE3191E reflect Snapper’s dedication to creating versatile, efficient, and user-centric mowing solutions tailored for today's diverse lawn care needs. These models are indeed ideal choices for any homeowner or professional landscaper looking to achieve the perfect lawn.