Poulan 415180 owner manual Maintenance

Page 13

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

•Maintain proper air pressure in both tires (14–17 P.S.I. / 19-24.5 N-m).

•Keeptiresfreeofgasolineandoil,whichcanharmrubber.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

LUBRICATION CHART

SAE 5W-30 Motor Oil

See “ENGINE” in Maintenance section

General

Purpose

Grease

Pivot points

Auger

 

grease fittings

Engine oil

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to

13 the snow thrower.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents HOW to SET UP Your Snow Thrower Parts Packed Separately in Carton Assembly / PRE-OPERATIONRemove Snow Thrower from Carton Install Traction Drive Control ROD See Figs Install Speed Control ROD See FigsUnfold Upper Handle Install Discharge Chute / Chute Rotator Head See Fig Install Auger Control ROD See FigsCheck Tire Pressure Know Your Snow Thrower OperationPrimer Ignition KEYRecoil auxiliary starter handle used for starting Meets A.N.S.I. Safety RequirementsDischarge chute control lever used to change the di Stopping HOW to USE Your Snow ThrowerTo Throw Snow See Fig Using the CLEAN-OUT Tool See FigTo Move Forward and Backward See Fig Scraper BAR Before Starting the EngineTo Start Engine Before Stopping Snow Throwing TipsIf Recoil Starter has Frozen Maintenance Engine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector To Remove Wheels See Fig Other StorageTroubleshooting Service Notes AIG plugr1 KEY Part Description 07Chute-knob2 414280 Knob, Lever Repair Parts Snow Thrower - Model NO. PR8527ES Handles 412677 Repair Parts Snow Thrower - Model NO. PR8527ES Drive 401732 Page KEY Part Description Page 415180 415181 415475Limited Warranty

415180 specifications

The Poulan 415180 is a powerful and versatile chainsaw designed for homeowners and professional users alike. With its combination of robust power, innovative technologies, and user-friendly features, it stands out in the competitive market of outdoor power equipment.

At the heart of the Poulan 415180 is a dependable 18-inch bar and chain that delivers exceptional cutting performance. The 42cc engine is engineered to provide sufficient torque for cutting through tough wood, making it suitable for a variety of tasks ranging from trimming branches to felling small trees. Its lightweight design allows for easy maneuverability, reducing user fatigue during extended use.

One of the standout features of the Poulan 415180 is its automatic oiler system. This technology ensures that the chain is consistently lubricated during operation, reducing wear and prolonging the life of both the chain and bar. The oiler can be adjusted to the specific demands of the task, allowing users to optimize the lubrication based on the type of wood being cut or the duration of use.

Starting up the chainsaw is made hassle-free with the innovative easy-start system. This feature minimizes the effort required to start the engine, providing a smooth and quick ignition with minimal pulling force. Additionally, the chainsaw is equipped with a primer bulb, ensuring that fuel reaches the carburetor more efficiently, which further improves starting performance in various weather conditions.

Safety is a key consideration in the design of the Poulan 415180. It includes features such as a chain brake, which can be activated to stop the chain almost instantly in the event of a kickback. The sturdy handle offers a comfortable grip and enhanced control, allowing for safe operation during cutting tasks.

The Poulan 415180 also emphasizes user comfort and convenience. Its lightweight construction, along with an anti-vibration system, helps to minimize fatigue and discomfort, making it an ideal choice for long periods of use.

Overall, the Poulan 415180 is a reliable chainsaw that merges power with practicality. It caters to the needs of both casual users and seasoned professionals, making it an excellent investment for anyone looking to tackle outdoor cutting projects with ease and efficiency.
Top Page Image Contents