Poulan 415180 owner manual Unfold Upper Handle, Install Speed Control ROD See Figs

Page 5

ASSEMBLY / PRE-OPERATION

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

CONTROL

ROD

PLASTIC TIE

UPPER

HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

SPEED CONTROL ROD

RETAINER

SPRING

SPEED SPEED

CONTROL CONTROL

BRACKET LEVER

FIG. 2

INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4)

The traction drive control rod has the long loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.

2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod into hole in drive control bracket. Secure with retainer spring.

TRACTION DRIVE

CONTROL ROD

RUBBER

SLEEVE

LOOP OPEN-

ING DOWN

PIVOT

BRACKET

FIG. 3

TRACTION DRIVE

RETAINER

CONTROL LEVER

SPRING

TRACTION

DRIVE

CONTROL

ROD

DRIVE

CONTROL

BRACKET

FIG. 4

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Know Your Snow Thrower OperationPrimer Ignition KEYDischarge chute control lever used to change the di Meets A.N.S.I. Safety RequirementsRecoil auxiliary starter handle used for starting Stopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig To Start Engine Before Starting the EngineScraper BAR If Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Maintenance Engine CleaningChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height To Remove Wheels See Fig Other StorageTroubleshooting Service Notes AIG plugr1 KEY Part Description 07Chute-knob2 414280 Knob, Lever Repair Parts Snow Thrower - Model NO. PR8527ES Handles 412677 Repair Parts Snow Thrower - Model NO. PR8527ES Drive 401732 Page KEY Part Description Page 415180 415181 415475Limited Warranty

415180 specifications

The Poulan 415180 is a powerful and versatile chainsaw designed for homeowners and professional users alike. With its combination of robust power, innovative technologies, and user-friendly features, it stands out in the competitive market of outdoor power equipment.

At the heart of the Poulan 415180 is a dependable 18-inch bar and chain that delivers exceptional cutting performance. The 42cc engine is engineered to provide sufficient torque for cutting through tough wood, making it suitable for a variety of tasks ranging from trimming branches to felling small trees. Its lightweight design allows for easy maneuverability, reducing user fatigue during extended use.

One of the standout features of the Poulan 415180 is its automatic oiler system. This technology ensures that the chain is consistently lubricated during operation, reducing wear and prolonging the life of both the chain and bar. The oiler can be adjusted to the specific demands of the task, allowing users to optimize the lubrication based on the type of wood being cut or the duration of use.

Starting up the chainsaw is made hassle-free with the innovative easy-start system. This feature minimizes the effort required to start the engine, providing a smooth and quick ignition with minimal pulling force. Additionally, the chainsaw is equipped with a primer bulb, ensuring that fuel reaches the carburetor more efficiently, which further improves starting performance in various weather conditions.

Safety is a key consideration in the design of the Poulan 415180. It includes features such as a chain brake, which can be activated to stop the chain almost instantly in the event of a kickback. The sturdy handle offers a comfortable grip and enhanced control, allowing for safe operation during cutting tasks.

The Poulan 415180 also emphasizes user comfort and convenience. Its lightweight construction, along with an anti-vibration system, helps to minimize fatigue and discomfort, making it an ideal choice for long periods of use.

Overall, the Poulan 415180 is a reliable chainsaw that merges power with practicality. It caters to the needs of both casual users and seasoned professionals, making it an excellent investment for anyone looking to tackle outdoor cutting projects with ease and efficiency.
Top Page Image Contents