Poulan 415180 owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotator head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotator head over chute bracket. If neces- sary, rotate chute assembly toalign square and pin on un- derside of chute rotator head with holes in chute bracket.

3.With chute rotator head and chute bracket aligned, position chute rotator head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATOR

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATOR HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

6

Image 6
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for startingDischarge chute control lever used to change the di HOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes AIG plugr1 KEY Part Description 07Chute-knob2 414280 Knob, Lever Repair Parts Snow Thrower - Model NO. PR8527ES Handles 412677 Repair Parts Snow Thrower - Model NO. PR8527ES Drive 401732 Page KEY Part Description Page 415475 415180 415181Limited Warranty

415180 specifications

The Poulan 415180 is a powerful and versatile chainsaw designed for homeowners and professional users alike. With its combination of robust power, innovative technologies, and user-friendly features, it stands out in the competitive market of outdoor power equipment.

At the heart of the Poulan 415180 is a dependable 18-inch bar and chain that delivers exceptional cutting performance. The 42cc engine is engineered to provide sufficient torque for cutting through tough wood, making it suitable for a variety of tasks ranging from trimming branches to felling small trees. Its lightweight design allows for easy maneuverability, reducing user fatigue during extended use.

One of the standout features of the Poulan 415180 is its automatic oiler system. This technology ensures that the chain is consistently lubricated during operation, reducing wear and prolonging the life of both the chain and bar. The oiler can be adjusted to the specific demands of the task, allowing users to optimize the lubrication based on the type of wood being cut or the duration of use.

Starting up the chainsaw is made hassle-free with the innovative easy-start system. This feature minimizes the effort required to start the engine, providing a smooth and quick ignition with minimal pulling force. Additionally, the chainsaw is equipped with a primer bulb, ensuring that fuel reaches the carburetor more efficiently, which further improves starting performance in various weather conditions.

Safety is a key consideration in the design of the Poulan 415180. It includes features such as a chain brake, which can be activated to stop the chain almost instantly in the event of a kickback. The sturdy handle offers a comfortable grip and enhanced control, allowing for safe operation during cutting tasks.

The Poulan 415180 also emphasizes user comfort and convenience. Its lightweight construction, along with an anti-vibration system, helps to minimize fatigue and discomfort, making it an ideal choice for long periods of use.

Overall, the Poulan 415180 is a reliable chainsaw that merges power with practicality. It caters to the needs of both casual users and seasoned professionals, making it an excellent investment for anyone looking to tackle outdoor cutting projects with ease and efficiency.