Poulan 414659 owner manual Table of Contents

Page 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impel- ler and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the engine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16. Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufac- tured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECAL ATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

4.0 Quarts

and Type:

 

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

21 Ounces (0,6 Liters)

 

 

Spark Plug:

Champion RJ19LM

Gap:

0.030" (0,762 mm)

 

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

ASSEMBLY / PRE-OPERATION

4-6

OPERATION

7-12

MAINTENANCE

13-14

MAINTENANCE SCHEDULE

13

SERVICE AND ADJUSTMENTS

15-17

STORAGE

17

TROUBLESHOOTING

18

REPAIR PARTS

20-31

3 WARRANTY

32

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for startingDischarge chute control lever used to change the di Stopping HOW to USE Your Snow ThrowerUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Engine CleaningService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Other StorageTroubleshooting Service Notes AIG plugr1 KEY Part Description Page 414280 Knob, Lever Repair Parts Repair Parts Snow Thrower Model PP10530ES Handles Repair Parts Drive Repair Parts Snow Thrower Model PP10530ES Drive 07Chassis-chain-cord-Tec3 KEY Part Description Repair Parts Wheels / Decals Wheels / Decals Limited Warranty

414659 specifications

The Poulan 414659 is a powerful and versatile chainsaw designed for homeowners and professionals alike. This reliable tool offers an impressive combination of features and technologies, making it a popular choice for various cutting tasks, from trimming branches to felling trees.

One of the standout features of the Poulan 414659 is its robust engine. With a high-performance 42cc motor, this chainsaw delivers ample power to tackle demanding projects while remaining lightweight and easy to maneuver. This balance of power and weight ensures that users can handle extended periods of cutting without experiencing excessive fatigue.

The chainsaw is equipped with a 16-inch bar and chain, providing a considerable cutting capacity. This length is ideal for handling medium-sized trees and larger branches. Furthermore, the Oregon chain is designed for smooth cutting performance, allowing for clean cuts and reducing the risk of kickback.

Ease of use is a key characteristic of the Poulan 414659. The chainsaw features an adjustable automatic oiling system that ensures the chain remains properly lubricated during operation. This feature not only prolongs the life of the chain but also contributes to efficient cutting. Additionally, the tool's easy-access air filter and spark plug make maintenance a breeze, allowing users to keep the chainsaw in peak condition with minimal effort.

Safety is another priority for Poulan. The chainsaw comes equipped with a chain brake, which quickly stops the chain in case of kickback. This feature, combined with a low-vibration design, enhances user safety and comfort, making it easier to control the saw during operation.

The Poulan 414659 also incorporates a soft-grip handle for improved comfort and better grip, ensuring users have a solid hold while cutting. The lightweight design, coupled with a well-balanced body, makes it easy to maneuver in various cutting positions.

In summary, the Poulan 414659 is a feature-rich chainsaw that combines power, ease of use, and safety. With its 42cc engine, 16-inch bar, automatic lubrication system, and safety features, this chainsaw is an excellent tool for anyone looking to tackle outdoor cutting tasks efficiently. Whether you're a seasoned professional or a first-time user, the Poulan 414659 offers the reliability and performance needed to get the job done effectively.
Top Page Image Contents