Poulan 414659 owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotator head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotator head over chute bracket. If neces- sary, rotate chute assembly toalign square and pin on un- derside of chute rotator head with holes in chute bracket.

3.With chute rotator head and chute bracket aligned, position chute rotator head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATOR

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATOR HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for startingDischarge chute control lever used to change the di HOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes AIG plugr1 KEY Part Description Page 414280 Knob, Lever Repair Parts Repair Parts Snow Thrower Model PP10530ES Handles Repair Parts Drive Repair Parts Snow Thrower Model PP10530ES Drive 07Chassis-chain-cord-Tec3 KEY Part Description Repair Parts Wheels / Decals Wheels / Decals Limited Warranty

414659 specifications

The Poulan 414659 is a powerful and versatile chainsaw designed for homeowners and professionals alike. This reliable tool offers an impressive combination of features and technologies, making it a popular choice for various cutting tasks, from trimming branches to felling trees.

One of the standout features of the Poulan 414659 is its robust engine. With a high-performance 42cc motor, this chainsaw delivers ample power to tackle demanding projects while remaining lightweight and easy to maneuver. This balance of power and weight ensures that users can handle extended periods of cutting without experiencing excessive fatigue.

The chainsaw is equipped with a 16-inch bar and chain, providing a considerable cutting capacity. This length is ideal for handling medium-sized trees and larger branches. Furthermore, the Oregon chain is designed for smooth cutting performance, allowing for clean cuts and reducing the risk of kickback.

Ease of use is a key characteristic of the Poulan 414659. The chainsaw features an adjustable automatic oiling system that ensures the chain remains properly lubricated during operation. This feature not only prolongs the life of the chain but also contributes to efficient cutting. Additionally, the tool's easy-access air filter and spark plug make maintenance a breeze, allowing users to keep the chainsaw in peak condition with minimal effort.

Safety is another priority for Poulan. The chainsaw comes equipped with a chain brake, which quickly stops the chain in case of kickback. This feature, combined with a low-vibration design, enhances user safety and comfort, making it easier to control the saw during operation.

The Poulan 414659 also incorporates a soft-grip handle for improved comfort and better grip, ensuring users have a solid hold while cutting. The lightweight design, coupled with a well-balanced body, makes it easy to maneuver in various cutting positions.

In summary, the Poulan 414659 is a feature-rich chainsaw that combines power, ease of use, and safety. With its 42cc engine, 16-inch bar, automatic lubrication system, and safety features, this chainsaw is an excellent tool for anyone looking to tackle outdoor cutting tasks efficiently. Whether you're a seasoned professional or a first-time user, the Poulan 414659 offers the reliability and performance needed to get the job done effectively.
Top Page Image Contents