Sears 536.884811 owner manual Safety Rules, Before USE, Fuel Safety

Page 2

SAFETY RULES

CAUTION: ALWAYS DISCONNECT SPARK PLUG WIRE AND A

PLACE WIRE WHERE IT CANNOT CONTACT SPARK PLUG TO

PREVENT ACCIDENTAL STARTING WHEN SETTING-UP,

TRANSPORTING, ADJUSTING OR MAKING REPAIRS.

IMPORTANT

SAFETY STANDARDS REQUIRE OPERATOR PRESENCE CONTROLS TO MINIMIZE

THE RISK OF INJURY. YOUR SNOW THROWER IS EQUIPPED WITH SUCH CONTROLS.

DO NOT ATTEMPT TO DEFEAT THE FUNCTION OF THE OPERATOR PRESENCE

CONTROL UNDER ANY CIRCUMSTANCES.

BEFORE USE

Read the owner's manual carefully. Be thor- oughly familiar with the controls and the proper use of the snow thrower. Know how to stop the snow thrower and disengage the controts quickly°

Do not operate the snow thrower without wear- ing adequate winter outer garments. Wear footwear that will improve footing on slippery surfaces.

Keep the area of operation clear of all persons, particularly small children, and pets.

=Thoroughly inspect the area where the snow thrower is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

Use extension cords and receptacles as speci- fied by the manufacturer for all snow throwers with electric drive motors or electric starting motors.

Use only attachments and accessories ap- proved by the manufacturer of the Snowthrower (such as tire chains, electric start kits, etc.,)

Never operate the snow thrower without good visibility ortight. Always be sure of your footing, and keep a firm hold on the handles° Walk; never run.

This snow thrower is for use on sidewalks, driveways, and other ground level surfaces. CAUTION should be exercised while using on steep sloping surfaces. DO NOT USE SNOW

THROWER ON SURFACES ABOVE GROUND LEVEL such as roofs of residences, garages, porches or other such structures or buildings.

=Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the snow thrower is in safe working condition_

Disengage all clutches and shift into neutral before starting the engine.,

=Adjust the snow thrower height to clear gravel or crushed rock surface.

Let engine and snow thrower adjust to outdoor temperatures before starting to clear snow.

FUEL SAFETY

Handle fuef with care; it is highly flammable.

Use an approved fuel container.

Check fuel supply before each use, allowing space for expansion as the heat of the engine and/or sun can cause fuel to expand.

Fillfueltankoutdoorswith extreme care. Never fill fuel tank indoors.

Replace fuel tank cap securely and wipe up spilled fuel.

Never remove fuel tank cap or add fuel to a running engine or hot engine.,

Never store fuel or snow thrower with fuel in the tank inside of a building where fumes may

reach an open flame or spark°

OPERATING SAFETY

Never allow children or young teenagers to operate the snow thrower and keep them away while it is operating. Never allow adults to operate the snow thrower without proper' in- struction. Do not carry passengers_

Always wear safety glasses or eye shields during operation orwhile performing an adjust- ment or repair to protect eyes from foreign objects that may be thrown from the snow thrower.

Exercise extrerne caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

Exercise caution to avoid slipping or falling, es- pecially when operating in reverse°

Do not clear snow across the face of slopes. Exercise caution when changing direction on slopes. Do not attempt to clear steep slopes.

Never operatethe snowthrowerwithout proper guards, plates or other safety protective de- vices in place.

2

Image 2
Contents Crafi Smah Before USE Safety RulesFuel Safety Safe Storage J8C Valve Clearance Maintenance AG ReementCustomer Responsibilities Contents IndexParts BAG Contents AssemblyContents of Shipping Carton Tools Required for Assembly To SET the Skid Height HOW to SET UP Your Snow ThrowerTo Remove Snow Thrower Inch To Install the Upper Handle and Crank AssemblyFlatwasher WormTo Install the Shifter Lever AS LYWeight Is thrownTo Move Forward and Backward HOW to USE Your Snow ThrowerTo Control Snow Discharge To Throw SnowFILL/ADD OIL To USE Weight Transfer SystemBefore Starting the Engine Handling or Storing ITTo Start Engine OP AtioTo Stop Engine Frozen StarterOperation Snow Thrower TE AnceGeneral Recommendations After First USELubricaiion AddmarkEngine Spark PlugTo Adjust Scraper BAR Cean Adjustme TSTo Adjust Skids Height To Adjust ChuteTo ADJ UST Belts ServiceCables Lever Mustbein Full ForwardposiDOORS, Away from Fire or Flame To Replace BeltsAuger Drive Belt To Adjust the Belt Guides Service and Adjustmen TSTo Adjust the Friction Wheel Track Drive BeltService AN Adjust Away from Fire or FlameTo Adjust Track To Replace Auger Shear BoltTo Adjust To Adjust CarburetorTo Adjust or Replace Spark Plug To ReplaceAway from Open Flame Snow ThrowerOther Lubrication Chart Service Records ScheduleService Dates Correction Trouble Shooting PointsTrouble Cause Inotes Craftsman 23 Snow Thrower Locknut CraftsmanPart Name I12 InoLockwasher78\ 91 !8 37 55 9013Craftsman 23 Snow Thrower NO, PARTNO. Part Name203O 308048 Auger Housing Assembly Re air Parts REFo ChuteRepair Parts Gear BOXRewind Starter no 590647MODELand Serial Numbershere162 34443A 96 *26756 98 33673A 100 101 102141 142 143 144 145 146 147 148 149 150 160 3408O Carburetor no a Inotes Model Number When Ordering Repair PARTS, AlwaysGive the Following Information Product Snow Thrower Engine Model Number Part Number Part Description

536.884811 specifications

The Sears 536.884811 is a well-regarded model of the sewing machine that has gained popularity among hobbyists and professionals alike. Renowned for its robust construction and user-friendly design, this sewing machine encapsulates both functionality and reliability.

One of the standout features of the Sears 536.884811 is its versatility. Equipped with a variety of built-in stitch patterns, it accommodates a wide range of sewing tasks from basic repairs to creative projects. The machine includes essential stitches such as straight, zigzag, and decorative options, making it suitable for different fabrics and styles.

The machine is powered by a reliable motor, ensuring consistent performance even with thicker materials. This is particularly valuable for users who work with a diverse assortment of textiles, from delicate silk to denim. Its adjustable presser foot pressure is a beneficial feature, allowing users to customize the sewing experience to match the fabric being used.

One of the noteworthy technologies integrated into the Sears 536.884811 is the automatic needle threader, which simplifies the threading process and is especially advantageous for those with visual impairments or dexterity issues. This machine also boasts an easy bobbin system, minimizing downtime spent on setup and maximizing productivity.

Ergonomics play a vital role in the design of the Sears 536.884811. Its layout includes a clear and intuitive control interface that enables even novice users to navigate settings easily. Additionally, the work area is well-lit, ensuring optimal visibility while sewing, which is crucial for precision in detailed work.

Storage and portability are other key characteristics that make the Sears 536.884811 a favorite among sewers. The machine often comes with built-in compartments that neatly organize accessories and tools, making it easy to keep everything in order. Moreover, its lightweight design facilitates transport, making it an excellent choice for classes or travel.

In summary, the Sears 536.884811 exemplifies a harmonious blend of classic sewing machine engineering and modern conveniences. With its range of stitch options, ease of use features, and thoughtful design, it serves as an ideal choice for anyone looking to elevate their sewing projects, whether they are beginners or more experienced crafters.