Troy-Bilt 4510 warranty Off-Season Storage, Short-Term Storage, Long-Term Storage

Page 23

Off-Season Storage

If the snow thrower will not be used for 30 days or longer, the equipment needs to be stored properly. Follow storage instructions below to ensure top performance from the snow thrower for many more years.

NOTE: Refer to the engine manual for more detailed information on preparing the snow thrower engine for storage.

Short-Term Storage

It is important to prevent gum deposits from forming in essential fuel system parts of the engine such as the carburetor, fuel filter, fuel hose, or tank during short-term storage (15-30 days). To prevent this, treat the fuel system using a fuel stabilizer.

Fuel stabilizer (such as STA-BIL™ or ULTRA-FRESH™) is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow it to reach the carburetor.

WARNING! Never store snow thrower with fuel in tank indoors or in poorly ventilated areas, where fuel fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance.

Long-Term Storage

To avoid engine problems, the fuel system should be emptied before storage for 30 days or longer.

1.Run the engine until the fuel tank is empty and it stops due to lack of fuel. Do not attempt to pour fuel from the engine.

2.Remove the spark plug and pour one (1) ounce of engine oil through the spark plug hole into the cylinder. Cover spark plug hole with a rag and crank the engine several times to distribute the oil. Replace spark plug.

WARNING! Never use engine or carburetor cleaning products in the fuel tank or permanent damage may occur.

Section 7 — Service

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Operator’s Manual Record Product Information Table of ContentsTo The Owner Thank YouPreparation Important Safe Operation PracticesCalifornia Proposition Training Safe Handling of Gasoline OperationSpark Arrestor Maintenance & StorageDo not modify engine Symbol Safety SymbolsAssembly Assembly & Set-UpContents of Carton Chute Directional Control Chute AssemblySet-Up AdjustmentsGas & Oil Fill-Up Testing Drive Control & Shift LeverAdjusting Drive and Auger Controls Ignition Key Controls and FeaturesShift Lever Choke ControlOil Fill Electric Starter SwitchChute Assembly Primer BulbWheel Steering Controls Chute Clean-Out ToolTwo-Way Chute Control Chute Directional ControlElectric Starter OperationStarting The Engine Stopping The EngineOperating Tips Replacing Shear PinsTo Engage Drive To Engage AugersLubrication Maintenance & AdjustmentsMaintenance Augers Chute Bracket AdjustmentGear Case Auger ShaftTire Pressure Drive ControlAuger Control Belt Removal Preparation ServiceBelt Replacement Auger Belt ReplacementPulley Slot Changing Friction Wheel Drive Belt ReplacementService Long-Term Storage Off-Season StorageShort-Term Storage Problem Cause Remedy TroubleshootingComponent Replacement PartsPage Page MANUFACTURER’S Limited Warranty for

4510 specifications

The Troy-Bilt 4510 is a versatile and robust walk-behind mower designed to cater to both residential and small commercial lawn care needs. Known for its durability and efficiency, this mower has several features and technologies that make it a reliable choice for homeowners and professionals alike.

One of the standout features of the Troy-Bilt 4510 is its powerful engine. It is equipped with a robust 160cc engine that offers exceptional performance in various cutting conditions. The engine provides ample power to tackle thick grass and uneven terrain, ensuring a clean and even cut every time. The easy-start mechanism simplifies the ignition process, allowing users to get to mowing quickly without any hassle.

The 4510 also boasts a self-propulsion system with variable speed control, giving users the ability to adjust the pace of the mower according to their preferences and the mowing conditions. This feature is particularly beneficial when navigating tight corners or dealing with steep inclines, providing excellent maneuverability without sacrificing power.

Cutting height adjustment is another key characteristic of the Troy-Bilt 4510. With a simple lever adjustment, users can choose from multiple cutting height settings, allowing for personalized grass length options to suit different seasons or lawn types. This flexibility in cutting height ensures an aesthetically pleasing lawn year-round.

The mower's deck is designed for efficiency, featuring a 21-inch cutting width that allows it to cover more ground in less time while still providing precise cuts. The deck is often made from durable steel, ensuring longevity and resistance to wear and tear. Additionally, the Troy-Bilt 4510 features a mulch, bag, and side discharge capability, offering versatility in grass clipping management.

For user comfort, the mower comes with ergonomically designed handles that reduce fatigue during extended mowing sessions. The folding handle design makes storage easy, allowing the mower to occupy less space when not in use.

In summary, the Troy-Bilt 4510 is a feature-rich walk-behind mower that emphasizes power, ease of use, and adaptability. With its reliable engine, self-propulsion system, adjustable cutting height, and multiple clipping options, it is well-suited for homeowners who take pride in their lawns, as well as for professionals seeking efficient landscaping solutions. Whether tackling residential lawns or small commercial projects, the Troy-Bilt 4510 delivers performance and quality that users have come to expect from the Troy-Bilt brand.
Top Page Image Contents