Troy-Bilt 4510 warranty Chute Directional Control, Chute Assembly

Page 8

NOTE: If the connector is not properly assembled, the shift rod will pivot and you will not be able to change speeds or direction. If the full range of speeds (forward and reverse) can not be achieved, refer to the “Maintenance and Adjustments” section.

Chute Directional Control

Remove the internal cotter pin from the upper chute crank. Slide the upper chute crank into the sleeve on the lower chute crank.

Align the hole in the upper chute crank with the hole in the sleeve (If necessary, use a pair of pliers to assist in aligning holes). Insert the internal cotter pin through the holes to secure the chute crank. See Figure 3-4.

Place chute assembly onto chute base as shown in Figure 3-5.

Make sure that the chute notches engage with the spiral end of chute directional control, and the two flange keepers are beneath the flange on the chute base.

Secure flange keeper removed earlier with lock nuts and screws. Tighten down nuts securing the other two flange keepers. See

Figure 3-6.

a

b

Figure 3-4

Chute Assembly

Remove lock nuts and screws securing one of the flange keepers to the chute assembly. Loosen the fasteners of the other two flange keepers. See Figure 3-5.

Figure 3-5

Figure 3-6

Check that the chute cables are properly routed through the cable guide attached to the lower handle assembly. See Figure 3-5.

8

Section 3— Assembly & Set-Up

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operator’s Manual Table of Contents To The OwnerThank You Record Product InformationPreparation Important Safe Operation PracticesCalifornia Proposition Training Operation Safe Handling of GasolineSpark Arrestor Maintenance & StorageDo not modify engine Safety Symbols SymbolAssembly Assembly & Set-UpContents of Carton Chute Assembly Chute Directional ControlAdjustments Set-UpGas & Oil Fill-Up Testing Drive Control & Shift LeverAdjusting Drive and Auger Controls Controls and Features Shift LeverChoke Control Ignition KeyElectric Starter Switch Chute AssemblyPrimer Bulb Oil FillChute Clean-Out Tool Two-Way Chute ControlChute Directional Control Wheel Steering ControlsOperation Starting The EngineStopping The Engine Electric StarterReplacing Shear Pins To Engage DriveTo Engage Augers Operating TipsLubrication Maintenance & AdjustmentsMaintenance Chute Bracket Adjustment Gear CaseAuger Shaft AugersTire Pressure Drive ControlAuger Control Service Belt ReplacementAuger Belt Replacement Belt Removal PreparationPulley Slot Drive Belt Replacement Changing Friction WheelService Long-Term Storage Off-Season StorageShort-Term Storage Troubleshooting Problem Cause RemedyReplacement Parts ComponentPage Page MANUFACTURER’S Limited Warranty for

4510 specifications

The Troy-Bilt 4510 is a versatile and robust walk-behind mower designed to cater to both residential and small commercial lawn care needs. Known for its durability and efficiency, this mower has several features and technologies that make it a reliable choice for homeowners and professionals alike.

One of the standout features of the Troy-Bilt 4510 is its powerful engine. It is equipped with a robust 160cc engine that offers exceptional performance in various cutting conditions. The engine provides ample power to tackle thick grass and uneven terrain, ensuring a clean and even cut every time. The easy-start mechanism simplifies the ignition process, allowing users to get to mowing quickly without any hassle.

The 4510 also boasts a self-propulsion system with variable speed control, giving users the ability to adjust the pace of the mower according to their preferences and the mowing conditions. This feature is particularly beneficial when navigating tight corners or dealing with steep inclines, providing excellent maneuverability without sacrificing power.

Cutting height adjustment is another key characteristic of the Troy-Bilt 4510. With a simple lever adjustment, users can choose from multiple cutting height settings, allowing for personalized grass length options to suit different seasons or lawn types. This flexibility in cutting height ensures an aesthetically pleasing lawn year-round.

The mower's deck is designed for efficiency, featuring a 21-inch cutting width that allows it to cover more ground in less time while still providing precise cuts. The deck is often made from durable steel, ensuring longevity and resistance to wear and tear. Additionally, the Troy-Bilt 4510 features a mulch, bag, and side discharge capability, offering versatility in grass clipping management.

For user comfort, the mower comes with ergonomically designed handles that reduce fatigue during extended mowing sessions. The folding handle design makes storage easy, allowing the mower to occupy less space when not in use.

In summary, the Troy-Bilt 4510 is a feature-rich walk-behind mower that emphasizes power, ease of use, and adaptability. With its reliable engine, self-propulsion system, adjustable cutting height, and multiple clipping options, it is well-suited for homeowners who take pride in their lawns, as well as for professionals seeking efficient landscaping solutions. Whether tackling residential lawns or small commercial projects, the Troy-Bilt 4510 delivers performance and quality that users have come to expect from the Troy-Bilt brand.
Top Page Image Contents