Troy-Bilt 772C0772 warranty Shift Cable, Chute Control, Drive Control & Shift Lever

Page 14

5

Making

Adjustments

WARNING

Read, understand, and follow all instruc- tions and warnings on the machine and in this manual before operating.

Never attempt to make any adjust- ments while the engine is running, except where speci- fied in operator’s manual.

Figure 13

Figure 14

Figure 15

Shift Cable

If the full range of speeds (forward and reverse) cannot be achieved, refer to the figure to the left and adjust the shift cable as follows:

1.Place the shift lever in the fastest forward speed position.

2.Loosen the hex nut on the shift cable index bracket. See Figure 13.

3.Pivot the bracket downward to take up slack in the cable.

4.Retighten the hex nut.

5.Check for correct adjustment before operating the snow thrower.

Chute Control

Once a season or every 25 hours of operation, whichever is earlier, check whether the four-way chute control™ cables have slackened. If the chute does not rotate fully or its pitch cannot be moved up or down, the chute control cables will have to be adjusted.

To adjust these cables, proceed as follows:

1.To tighten cable, loosen the top nut and tighten the bottom nut on the cable.

2.Adjust equally on both sides by working on both cables. See Figure 14.

Drive Control & Shift Lever

When the drive control is released and in the disengaged “up” position, the cable should have very little slack. It should NOT be tight.

Check the adjustment of the drive control as follows:

1.With the drive control released, push the snow thrower gently forward. The unit should roll freely.

2.Engage the drive control and gently attempt to push the snow thrower forward. The wheels should not turn. The unit should not roll freely.

3.With the drive control released, move the shift lever back and forth between the R2 position and the F6 position several times. There should be no resistance in the shift lever.

4.If any of the above tests failed, the drive cable is in need of adjustment. Proceed as follows:

5.Loosen the lower hex nut on the drive cable bracket. See Figure 15.

6.Position the bracket upward to provide more slack (or downward to increase cable tension).

7.Retighten the lower hex nut.

You can also check the adjustment as follows:

1.With the snow thrower tipped forward (be certain to drain gasoline or place plastic film under the gas cap if the snow thrower has already been operated), remove the frame cover underneath the snow thrower by removing the self-tapping screws. Refer to step 2 on page 17.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OPERATOR’S Manual 772C0772 28/2005Table of Contents Chute Clean-out Tool Your Responsibility Restrict the useSafe Operation Operation Do not modify enginePivoting handle upward Setting Up Your Snow ThrowerRecommendations Lower handleInstructions care Prior to operatingTest on Shear Pin Storage optionalDrift Cutters If Equipped All modelsSkid Shoes Clean-Out ToolClean-Out Tool Tire Pressure Pneumatic TiresOperating Your Snow Thrower Ignition Key Auger ControlDrive Control/ Auger Control Lock Four-Way Chute ControlElectric Starter Electric Starter If EquippedStarting The Engine Recoil StarterRecoil Starter Auger Control TestDrive Control & Shift Lever Shift CableChute Control Standard Skid Shoe Reversible Skid ShoeLubrication Maintaining Your Snow ThrowerEngine Shave Plate and Skid ShoesAuger Belt Replacement Drive Belt Replacement AugersFriction Wheel Removal Off-Season Storage Wipe equipment with an oiled rag to prevent rustTrouble Shooting TWO Year Supreme Warranty

772C0772 specifications

The Troy-Bilt 772C0772 is a versatile and reliable tool designed to tackle a variety of lawn care tasks with ease. This high-performance lawn mower is particularly appreciated by homeowners and landscapers alike for its robust design and advanced features that simplify yard maintenance.

One of the standout characteristics of the Troy-Bilt 772C0772 is its powerful engine. Equipped with a reliable 159cc OHV engine, this mower provides ample power to tackle tough grass types and uneven terrains. The engine’s air-cooled design ensures optimal performance and durability, allowing users to work efficiently even during extensive mowing sessions.

The cutting deck of the Troy-Bilt 772C0772 measures 21 inches, making it ideal for both large and small lawns. This size allows for excellent maneuverability while still covering substantial ground. The mower also features the innovative TriAction cutting system, which combines a unique blade design with a specially shaped deck. This results in a superior cut quality and effective grass clipping dispersion, leaving a clean finish on your lawn.

Another key feature of the Troy-Bilt 772C0772 is its adjustable cutting height. The mower allows users to choose from six different cutting positions, ranging from 1.25 to 3.75 inches. This level of customization enables homeowners to achieve their desired lawn height and adapt to varying grass conditions throughout the season.

The mower is also designed with user convenience in mind. It features an ergonomic handle that can be height adjusted, providing comfort while minimizing fatigue during operation. The 772C0772 integrates a robust steel frame and deck for enhanced durability, ensuring that it withstands demanding usage over the years.

Additionally, the Troy-Bilt 772C0772 is equipped with a reliable rear bagging system that captures grass clippings efficiently, keeping your lawn tidy. For those who prefer mulching, the mower comes with a mulching plug that enhances nutrient recycling back to the soil.

In summary, the Troy-Bilt 772C0772 is a powerful and efficient lawn mower that offers versatile functionality with its advanced engine, effective cutting system, and user-friendly design. It’s a solid choice for anyone looking to maintain a pristine lawn with minimal effort.
Top Page Image Contents