Troy-Bilt 772C0772 warranty Off-Season Storage, Wipe equipment with an oiled rag to prevent rust

Page 20

7

Off-Season

Storage

WARNING

Never store snow thrower with fuel in tank indoors or in poorly ventilated areas, where fuel fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance.

Drain fuel into an approved container outdoors, away from any open flame. Be certain engine is cool. Do not smoke. Fuel left in engine during warm weather deteriorates and will cause serious starting problems.

Do not drain carburetor if using fuel stabilizer. Never use engine or carburetor cleaning products in the fuel tank or permanent damage may occur.

Observe the following, when preparing your snow thrower for off-season storage:

•Drain fuel into an approved container outdoors, away from any open flame. Allow engine to cool. Extinguish cigarettes, cigars, pipes and other sources of ignition prior to draining fuel. Fuel left in engine during warm weather deteriorates and will cause serious starting problems.

•If unit is to be stored over 30 days, prepare for storage as instructed in the separate engine manual packed with your unit.

•Run engine until fuel tank is empty and engine stops due to lack of fuel.

•Remove gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine.

•Drain carburetor by pressing upward on bowl drain, located below the carburetor cover.

•Fuel stabilizers, such as STA-BIL®, are an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Do not drain carburetor if using a fuel stabilizer.

•Wipe equipment with an oiled rag to prevent rust.

•Remove spark plug and pour one ounce of engine oil through spark plug hole into cylinder. Cover spark plug hole with rag. Crank engine several times to distribute oil. Replace spark plug.

•Follow the lubrication recommendations found in the Maintenance Section.

•Always store the snow thrower in a clean, dry area.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents OPERATOR’S Manual 772C0772 28/2005Table of Contents Chute Clean-out Tool Your Responsibility Restrict the useSafe Operation Operation Do not modify engineSetting Up Your Snow Thrower RecommendationsPivoting handle upward Lower handlePrior to operating Test onInstructions care Shear Pin Storage optionalDrift Cutters If Equipped All modelsClean-Out Tool Clean-Out ToolSkid Shoes Tire Pressure Pneumatic TiresOperating Your Snow Thrower Auger Control Drive Control/ Auger Control LockIgnition Key Four-Way Chute ControlElectric Starter If Equipped Starting The EngineElectric Starter Recoil StarterRecoil Starter Auger Control TestDrive Control & Shift Lever Shift CableChute Control Standard Skid Shoe Reversible Skid ShoeMaintaining Your Snow Thrower EngineLubrication Shave Plate and Skid ShoesAuger Belt Replacement Drive Belt Replacement AugersFriction Wheel Removal Off-Season Storage Wipe equipment with an oiled rag to prevent rustTrouble Shooting TWO Year Supreme Warranty

772C0772 specifications

The Troy-Bilt 772C0772 is a versatile and reliable tool designed to tackle a variety of lawn care tasks with ease. This high-performance lawn mower is particularly appreciated by homeowners and landscapers alike for its robust design and advanced features that simplify yard maintenance.

One of the standout characteristics of the Troy-Bilt 772C0772 is its powerful engine. Equipped with a reliable 159cc OHV engine, this mower provides ample power to tackle tough grass types and uneven terrains. The engine’s air-cooled design ensures optimal performance and durability, allowing users to work efficiently even during extensive mowing sessions.

The cutting deck of the Troy-Bilt 772C0772 measures 21 inches, making it ideal for both large and small lawns. This size allows for excellent maneuverability while still covering substantial ground. The mower also features the innovative TriAction cutting system, which combines a unique blade design with a specially shaped deck. This results in a superior cut quality and effective grass clipping dispersion, leaving a clean finish on your lawn.

Another key feature of the Troy-Bilt 772C0772 is its adjustable cutting height. The mower allows users to choose from six different cutting positions, ranging from 1.25 to 3.75 inches. This level of customization enables homeowners to achieve their desired lawn height and adapt to varying grass conditions throughout the season.

The mower is also designed with user convenience in mind. It features an ergonomic handle that can be height adjusted, providing comfort while minimizing fatigue during operation. The 772C0772 integrates a robust steel frame and deck for enhanced durability, ensuring that it withstands demanding usage over the years.

Additionally, the Troy-Bilt 772C0772 is equipped with a reliable rear bagging system that captures grass clippings efficiently, keeping your lawn tidy. For those who prefer mulching, the mower comes with a mulching plug that enhances nutrient recycling back to the soil.

In summary, the Troy-Bilt 772C0772 is a powerful and efficient lawn mower that offers versatile functionality with its advanced engine, effective cutting system, and user-friendly design. It’s a solid choice for anyone looking to maintain a pristine lawn with minimal effort.
Top Page Image Contents