Troy-Bilt 772C0772 warranty Augers, Drive Belt Replacement

Page 18

6 1

Maintaining

Your Snow

Thrower

2

NEVER replace the auger shear pins with standard hex pins. Any damage to the auger gearbox or other components as a result of failing to do so will NOT be covered by your snow thrower’s warranty.

3

�

�

 

�

Augers

•The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins may shear. Refer to Figure 9.

•If the augers will not turn, check to see if the pins have sheared. One set of replacement shear pins has been provided with the snow thrower. When replacing pins, spray an oil lubricant into shaft before inserting new pins.

Drive Belt Replacement

To remove and replace your snow thrower’s auger belt, proceed as follows:

1.Remove the plastic belt cover on the front of the engine by removing the two self-tapping screws.

•Drain the gasoline from the snow thrower, or place a piece of plastic under the gas cap.

•Carefully pivot the snow thrower up and forward so that it rests on the auger housing.

2.Remove the frame cover from the underside of the snow thrower by removing four self-tapping screws which secure it.

3.a. Grasp the idler pulley and pivot it toward the right.

b.Roll the auger belt off the engine pulley.

c.Lift the drive belt off engine pulley.

4.Slip the drive belt off the pulley and between friction wheel and friction wheel disc.

• Remove and replace belt in the reverse order.

4

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OPERATOR’S Manual 772C0772 28/2005Table of Contents Chute Clean-out Tool Your Responsibility Restrict the useSafe Operation Operation Do not modify enginePivoting handle upward Setting Up Your Snow ThrowerRecommendations Lower handleInstructions care Prior to operatingTest on Shear Pin Storage optionalDrift Cutters If Equipped All modelsSkid Shoes Clean-Out ToolClean-Out Tool Tire Pressure Pneumatic TiresOperating Your Snow Thrower Ignition Key Auger ControlDrive Control/ Auger Control Lock Four-Way Chute ControlElectric Starter Electric Starter If EquippedStarting The Engine Recoil StarterRecoil Starter Auger Control TestShift Cable Chute ControlDrive Control & Shift Lever Standard Skid Shoe Reversible Skid ShoeLubrication Maintaining Your Snow ThrowerEngine Shave Plate and Skid ShoesAuger Belt Replacement Drive Belt Replacement AugersFriction Wheel Removal Off-Season Storage Wipe equipment with an oiled rag to prevent rustTrouble Shooting TWO Year Supreme Warranty

772C0772 specifications

The Troy-Bilt 772C0772 is a versatile and reliable tool designed to tackle a variety of lawn care tasks with ease. This high-performance lawn mower is particularly appreciated by homeowners and landscapers alike for its robust design and advanced features that simplify yard maintenance.

One of the standout characteristics of the Troy-Bilt 772C0772 is its powerful engine. Equipped with a reliable 159cc OHV engine, this mower provides ample power to tackle tough grass types and uneven terrains. The engine’s air-cooled design ensures optimal performance and durability, allowing users to work efficiently even during extensive mowing sessions.

The cutting deck of the Troy-Bilt 772C0772 measures 21 inches, making it ideal for both large and small lawns. This size allows for excellent maneuverability while still covering substantial ground. The mower also features the innovative TriAction cutting system, which combines a unique blade design with a specially shaped deck. This results in a superior cut quality and effective grass clipping dispersion, leaving a clean finish on your lawn.

Another key feature of the Troy-Bilt 772C0772 is its adjustable cutting height. The mower allows users to choose from six different cutting positions, ranging from 1.25 to 3.75 inches. This level of customization enables homeowners to achieve their desired lawn height and adapt to varying grass conditions throughout the season.

The mower is also designed with user convenience in mind. It features an ergonomic handle that can be height adjusted, providing comfort while minimizing fatigue during operation. The 772C0772 integrates a robust steel frame and deck for enhanced durability, ensuring that it withstands demanding usage over the years.

Additionally, the Troy-Bilt 772C0772 is equipped with a reliable rear bagging system that captures grass clippings efficiently, keeping your lawn tidy. For those who prefer mulching, the mower comes with a mulching plug that enhances nutrient recycling back to the soil.

In summary, the Troy-Bilt 772C0772 is a powerful and efficient lawn mower that offers versatile functionality with its advanced engine, effective cutting system, and user-friendly design. It’s a solid choice for anyone looking to maintain a pristine lawn with minimal effort.
Top Page Image Contents